yes! I'm running -current ( snapshot June 6 ). sorry I didn't saw
2009/06/03 httpd ABI change, So I should build php from port tree?


here is my dmesg:

OpenBSD 4.5-current (GENERIC.MP) #45: Sat Jun  6 13:35:06 MDT 2009
    dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
real mem  = 1063415808 (1014MB)
avail mem = 1019879424 (972MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 02/08/07, BIOS32 rev. 0 @
0xfd5f0, SMBIOS rev. 2.4 @ 0xdc010 (17 entries)
bios0: vendor Phoenix Technologies LTD version "R0100J4" date 02/08/2007
bios0: Sony Corporation VGN-N370E
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC HPET MCFG SLIC APIC BOOT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PWRB(S4) PXS1(S3) PXS2(S3) PXS3(S3) PXS4(S3)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) Duo CPU T2450 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,EST,TM2,xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 4 (RP02)
acpiprt4 at acpi0: bus 6 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus 8 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 90 degC
acpitz0: TZ00: failed to read _AC0
acpitz1 at acpi0: critical temperature 90 degC
acpitz1: TZ01: failed to read _AC0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 type LiOn oem "Sony Corp."
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
bios0: ROM list: 0xc0000/0x10000! 0xdc000/0x4000! 0xe0000/0x1800!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130f2c06000f2c
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2000 MHz (1404 mV): speeds: 2000, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 7)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 1 int 22 (irq 4)
azalia0: codecs: Realtek ALC262, Conexant/0x2c06, using Realtek ALC262
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1
int 17 (irq 3)
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x16,
Yukon-2 FE rev. A1 (0x1): apic 1 int 16 (irq 7)
msk0 at mskc0 port A: address 00:13:a9:c6:c4:6c
eephy0 at msk0 phy 0: 88E3082 10/100 PHY, rev. 3
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1
int 16 (irq 7)
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1
int 18 (irq 11)
pci3 at ppb2 bus 6
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
apic 1 int 18 (irq 11), MoW1, address 00:19:d2:96:64:28
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
int 23 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1
int 17 (irq 3)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1
int 18 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1
int 23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1
int 16 (irq 255), CardBus support disabled
"TI PCIXX12 FireWire" rev 0x00 at pci4 dev 3 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci4 dev 3 function 2
not configured
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-850S, 1.60> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <TOSHIBA MK1637GSX>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
1 int 19 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
softraid0 at root
root on wd0a swap on wd0b dump on wd0b


On 6/16/09, Joachim Schipper <joac...@joachimschipper.nl> wrote:
> On Tue, Jun 16, 2009 at 02:07:33PM +0430, MANI wrote:
>> First of all thanks for the clues.
>
> Are you, perchance, running -current? The http ABI was changed
> (http://www.openbsd.org/faq/current.html#20090603), and you appear to be
> running a port from -stable. (Which is not guaranteed to work, and
> doesn't, in this case.)
>
> You didn't post a dmesg and may not be running a kernel compiled by the
> project, so I wasn't able to figure out whether you were running
> -current.
>
> For what it's worth, my Apache/PHP install works fine...
>
>               Joachim

Reply via email to