Hi moj Im pretty sure it is the dl-120 chipet. Theres a picture of the inside of the unit on the website of the company i bought it from.
http://www.carcomputer.co.uk/component/page,shop.product_details/flypage,shop.flypage/product_id,322/category_id,46/manufacturer_id,0/option,com_virtuemart/Itemid,26/ I have had a go at changing the code base you guys have already coded (big thanks by the way). Ive included my patch in this email and the output from usbdevs -v Id be the first to admit I have no idea how im going to get this to work with X so any help you can give would be amazing. Cheers Will On Fri, Jul 31, 2009 at 7:46 PM, Mats O Jansson <m...@cntw.com> wrote: > On Tue, 28 Jul 2009, Edd Barrett wrote: > > Hello, >> >> My friend is looking to use this small touchscreen for a project he is >> doing. The model is: Mimo UM-740, which he was hoping would be attaching >> to the udl(4) driver. Does anyone know if this screen is based on the >> dl-120/dl-160 chipset? >> >> I have attached a dmesg, the screen was plugged in to my thinkpad. As >> you can see, the mouse and camera are happy, the display itself is not. >> > > As far as I can see the monitor has a DisplayLink chipset in it. But which > is hard to say. An educated guess should be an dl-12x (Since the screen is > 800x480). > > To make the driver work I need the output from > > usbdevs -v > > -moj > > Thanks >> -- >> >> Best Regards >> >> Edd Barrett >> (Freelance software developer / technical writer / open-source developer) >> >> http://students.dec.bmth.ac.uk/ebarrett >> OpenBSD 4.6 (GENERIC) #58: Thu Jul 9 21:24:42 MDT 2009 >> dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC >> cpu0: Intel(R) Pentium(R) M processor 1700MHz ("GenuineIntel" 686-class) >> 1.70 GHz >> cpu0: >> FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,TM,SBF,EST,TM2 >> real mem = 1072656384 (1022MB) >> avail mem = 1028411392 (980MB) >> mainbus0 at root >> bios0 at mainbus0: AT/286+ BIOS, date 09/22/05, BIOS32 rev. 0 @ 0xfd750, >> SMBIOS rev. 2.33 @ 0xe0010 (57 entries) >> bios0: vendor IBM version "1QET97WW (3.02 )" date 09/22/2005 >> bios0: IBM 2673W7Z >> apm0 at bios0: Power Management spec V1.2 >> apm0: battery life expectancy 100% >> apm0: AC on, battery charge high >> acpi at bios0 function 0x0 not configured >> pcibios0 at bios0: rev 2.1 @ 0xfd6e0/0x920 >> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdea0/272 (15 entries) >> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00) >> pcibios0: PCI bus #6 is the last bus >> bios0: ROM list: 0xc0000/0x10000 0xd0000/0x1000 0xd1000/0x1000 >> 0xdc000/0x4000! 0xe0000/0x10000 >> cpu0 at mainbus0: (uniprocessor) >> cpu0: Enhanced SpeedStep 1699 MHz: speeds: 1700, 1400, 1200, 1000, 800, >> 600 MHz >> pci0 at mainbus0 bus 0: configuration mode 1 (bios) >> io address conflict 0x5800/0x8 >> io address conflict 0x5808/0x4 >> io address conflict 0x5810/0x8 >> io address conflict 0x580c/0x4 >> pchb0 at pci0 dev 0 function 0 "Intel 82855PM Host" rev 0x03 >> intelagp0 at pchb0 >> agp0 at intelagp0: aperture at 0xd0000000, size 0x10000000 >> ppb0 at pci0 dev 1 function 0 "Intel 82855PM AGP" rev 0x03 >> pci1 at ppb0 bus 1 >> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6" rev 0x00 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> radeondrm0 at vga1: irq 11 >> drm0 at radeondrm0 >> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 11 >> uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 11 >> uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 11 >> ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 >> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81 >> pci2 at ppb1 bus 2 >> mem address conflict 0xb0000000/0x1000 >> mem address conflict 0xb1000000/0x1000 >> cbb0 at pci2 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 >> cbb1 at pci2 dev 0 function 1 "Ricoh 5C476 CardBus" rev 0xaa: irq 11 >> "Ricoh 5C552 Firewire" rev 0x02 at pci2 dev 0 function 2 not configured >> em0 at pci2 dev 1 function 0 "Intel PRO/1000MT (82540EP)" rev 0x03: irq >> 11, address 00:11:25:b1:32:43 >> ral0 at pci2 dev 2 function 0 "Ralink RT2561S" rev 0x00: irq 11, address >> 00:12:0e:61:5b:74 >> ral0: MAC/BBP RT2561C, RF RT5225 >> cardslot0 at cbb0 slot 0 flags 0 >> cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0xb0 >> pcmcia0 at cardslot0 >> cardslot1 at cbb1 slot 1 flags 0 >> cardbus1 at cardslot1: bus 6 device 0 cacheline 0x0, lattimer 0xb0 >> pcmcia1 at cardslot1 >> ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01: 24-bit >> timer at 3579545Hz >> pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, >> channel 0 configured to compatibility, channel 1 configured to compatibility >> wd0 at pciide0 channel 0 drive 0: <HTS726060M9AT00> >> wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors >> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 >> pciide0: channel 1 disabled (no drives) >> ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 11 >> iic0 at ichiic0 >> spdmem0 at iic0 addr 0x50: 512MB DDR SDRAM non-parity PC2700CL2.5 >> spdmem1 at iic0 addr 0x51: 512MB DDR SDRAM non-parity PC2700CL2.5 >> auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 11, >> ICH4 AC97 >> ac97: codec id 0x41445374 (Analog Devices AD1981B) >> ac97: codec features headphone, 20 bit DAC, No 3D Stereo >> audio0 at auich0 >> "Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured >> usb1 at uhci0: USB revision 1.0 >> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb2 at uhci1: USB revision 1.0 >> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> usb3 at uhci2: USB revision 1.0 >> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 >> isa0 at ichpcib0 >> isadma0 at isa0 >> pckbc0 at isa0 port 0x60/5 >> pckbd0 at pckbc0 (kbd slot) >> pckbc0: using irq 1 for kbd slot >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pms0 at pckbc0 (aux slot) >> pckbc0: using irq 12 for aux slot >> wsmouse0 at pms0 mux 0 >> pcppi0 at isa0 port 0x61 >> midi0 at pcppi0: <PC speaker> >> spkr0 at pcppi0 >> lpt2 at isa0 port 0x3bc/4: polled >> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 >> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 >> biomask effd netmask effd ttymask ffff >> mtrr: Pentium Pro MTRR support >> uhub4 at uhub2 port 1 "ALCOR Generic USB Hub" rev 1.10/3.12 addr 2 >> uhub5 at uhub4 port 3 "Alcor Micro product 0x6254" rev 2.00/1.00 addr 3 >> uvideo0 at uhub5 port 1 configuration 1 interface 0 "Vimicro Corp. Venus >> USB2.0 Camera" rev 2.00/1.00 addr 4 >> video0 at uvideo0 >> ugen0 at uhub5 port 3 "e2i Technology, Inc. USB Touchpanel" rev 1.10/1.00 >> addr 5 >> uhidev0 at uhub5 port 4 configuration 1 interface 1 "DisplayLink >> nanovision MiMo" rev 2.00/0.07 addr 6 >> uhidev0: iclass 3/0 >> uhid0 at uhidev0: input=1, output=0, feature=0 >> softraid0 at root >> root on wd0a swap on wd0b dump on wd0b [demime 1.01d removed an attachment of type application/octet-stream which had a name of usbdevs] [demime 1.01d removed an attachment of type application/octet-stream which had a name of patch1]
