Kenneth R Westerback wrote:
On Fri, Jan 15, 2010 at 07:51:53PM -0700, Jeff Ross wrote:
With the most recent snapshot (#385, from Jan 11) I can boot just
fine so long as the disks I have attached to ahcd (in an external
enclosure) are not powered on.
Many things were fixed at the just concluded Melbourne hackathon, so
we really, really, really need to know if a kernel compilied from
-current of Jan 16 or later exhibits the same problem.
As a general note, the source tree is going to be locked in the
near future for 4.7. There has been a major re-write of the SCSI
layer internals, and many device drivers were touched. TEST NOW!
Test anything that produces sd, cd, st, etc. devices. All hardware
and all weird-ass i/o situations. TEST NOW!
Snapshots of appropriate vintage may appear soon. Until then you
must use the source. TEST NOW!
Problems reports of anything related to SCSI between the 10th and
16th will be a waste of time as too many things were in flux.
.... Ken
!DSPAM:4b515a8b65181509963518!
Hi Ken,
Took me a while to get up and running enough to build -current (man have
I been spoiled by snapshots ;-).
I made sure regards your following message that I had the most recent
scsi_base.c but when I finally got -current built and rebooted I still
have the same problem.
First, here's the new dmesg with the external enclosure off, so this is
a normal, successful boot:
boot>
booting hd0a:/bsd: 6828352+1055492 [52+356784+339780]=0x82eee0
entry point at 0x200120, Intel Corporation
[ using 696988 bytes of bsd ELF
symbol table ] Copyright (c) 1982,
1986, 1989, 1991, 1993 The
Regents of the University of California. All rights reserved.
Copyright (c) 1995-2010 OpenBSD. All rights reserved.
http://www.OpenBSD.org Intel(R) Boot Agent GE v1.2.16
OpenBSD 4.6-current (GENERIC.MP) #20:
Sat Jan 16 12:02:48 MST 2010
r...@varley.openvistas.net:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41
GHz0080009 cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 4160253952 (3967MB)nt.
avail mem = 4053823488 (3866MB)
mainbus0 at root
bios0 at mainbus0:
AT/286+ BIOS, date 09/18/03, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.3 @
0xf84b0 (39 entries)
bios0: vendor American Megatrends Inc. version "080009" date 09/18/2003
bios0: Supermicro X5DPA
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC OEMB
acpi0: wakeup devices PS2K(S1) PS2M(S1) SMBS(S1) AUDI(S1) MODM(S1)
USB0(S1) USB1(S1) USB2(S1) P0P1(S1) GLN1(S1) GLN2(S1) BT64(S1) PWRB(S1)
SLPB(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 3 (P2P3)
acpiprt3 at acpi0: bus 4 (BT64)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000 0xca000/0x2600
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "Intel E7500 PCI" rev 0x01
pci1 at ppb0 bus 2
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci2 at ppb1 bus 4
ami0 at pci2 dev 2 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 10
int 4 (irq 10)
ami0: LSI 520, 64b/lhc, FW 1L47, BIOS vG121, 64MB RAM
ami0: 1 channels, 0 FC loops, 2 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 140270MB, 512 bytes/sec, 287272960 sec total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 70135MB, 512 bytes/sec, 143636480 sec total
scsibus1 at ami0: 16 targets
ahd0 at pci2 dev 3 function 0 "Adaptec AIC-7902B U320" rev 0x10: apic 10
int 2 (irq 10)
ahd0: aic7902, U320 Wide Channel A, PCI 33 or 66MHz, 512 SCBs
scsibus2 at ahd0: 16 targets, initiator 7
ahd1 at pci2 dev 3 function 1 "Adaptec AIC-7902B U320" rev 0x10: apic 10
int 3 (irq 10)
ahd1: aic7902, U320 Wide Channel B, PCI 33 or 66MHz, 512 SCBs
scsibus3 at ahd1: 16 targets, initiator 7
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci3 at ppb2 bus 3
em0 at pci3 dev 1 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: apic
9 int 4 (irq 10), address 00:30:48:76:07:dc
em1 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: apic
9 int 5 (irq 10), address 00:30:48:76:07:dd
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: apic 8
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: apic 8
int 19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: apic 8
int 18 (irq 9)
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x42
pci4 at ppb3 bus 1
vga1 at pci4 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus4 at atapiscsi0: 2 targets
cd0 at scsibus4 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PZ16> ATAPI
5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02:
apic 8 int 17 (irq 0)
iic0 at ichiic0
admtemp0 at iic0 addr 0x18: Xeon
admtemp1 at iic0 addr 0x1a: Xeon
lm1 at iic0 addr 0x2d: W83627HF
spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem2 at iic0 addr 0x55: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2300CL2.5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm2 at wbsio0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0 " USB Keyboard" rev
1.10/2.40 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 " USB Keyboard" rev
1.10/2.40 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhidev2 at uhub0 port 2 configuration 1 interface 0 "vendor 0x04f3
USB+PS/2 Optical Mouse" rev 1.10/24.58 addr 3
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
root on sd1a swap on sd1b dump on sd1b
Automatic boot in progress: starting file system checks.
/dev/rsd1a: file system is clean; not checking
/dev/rsd1j: file system is clean; not checking
/dev/rsd0a: file system is clean; not checking
/dev/rsd0b: file system is clean; not checking
/dev/rsd1i: file system is clean; not checking
/dev/rsd1h: file system is clean; not checking
/dev/rsd1d: file system is clean; not checking
/dev/rsd1e: file system is clean; not checking
/dev/rsd1f: file system is clean; not checking
/dev/rsd1g: file system is clean; not checking
setting tty flags
pf enabled
machdep.allowaperture: 0 -> 2
starting network
[1] 8729
starting system logger
starting initial daemons: ntpd.
savecore: no core dump
checking quotas: done.
building ps databases: kvm dev.
clearing /tmp
starting pre-securelevel daemons:.
setting kernel security level: kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd sendmail inetd.
starting local daemons:.
standard daemons: cron.
Sat Jan 16 15:58:34 MST 2010
OpenBSD/i386 (varley.openvistas.net) (tty00)
login:
And now here is the dmesg with the external enclosure powered up:
boot>
booting hd0a:/bsd: 6828352+1055492 [52+356784+339780]=0x82eee0
entry point at 0x200120, Intel Corporation
[ using 696988 bytes of bsd ELF
symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993e
PXE-M0F:The Regents of the University of California. All
rights reserved. Copyright (c) 1995-2010 OpenBSD. All rights
reserved. http://www.OpenBSD.org
OpenBSD 4.6-current
(GENERIC.MP) #20: Sat Jan 16 12:02:48 MST 2010
r...@varley.openvistas.net:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41
GHz cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem = 4160253952 (3967MB)
avail mem = 4053823488 (3866MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/18/03, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.3 @ 0xf84b0 (39 entries)
bios0: vendor American Megatrends Inc. version "080009" date 09/18/2003
bios0: Supermicro X5DPA
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC OEMB
acpi0: wakeup devices PS2K(S1) PS2M(S1) SMBS(S1) AUDI(S1) MODM(S1)
USB0(S1) USB1(S1) USB2(S1) P0P1(S1) GLN1(S1) GLN2(S1) BT64(S1) PWRB(S1)
SLPB(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
cpu3 at mainbus0: apid 7 (application processor)
cpu3: Intel(R) Xeon(TM) CPU 2.40GHz ("GenuineIntel" 686-class) 2.41 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec80000, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec80400, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P1)
acpiprt2 at acpi0: bus 3 (P2P3)
acpiprt3 at acpi0: bus 4 (BT64)
acpicpu0 at acpi0
acpicpu1 at acpi0
acpicpu2 at acpi0
acpicpu3 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x1000
0xca000/0x8e00 0xd3000/0x2600
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E7501 Host" rev 0x01
ppb0 at pci0 dev 2 function 0 "Intel E7500 PCI" rev 0x01
pci1 at ppb0 bus 2
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci2 at ppb1 bus 4
ami0 at pci2 dev 2 function 0 "Symbios Logic MegaRAID" rev 0x01: apic 10
int 4 (irq 10)
ami0: LSI 520, 64b/lhc, FW 1L47, BIOS vG121, 64MB RAM
ami0: 1 channels, 0 FC loops, 2 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 140270MB, 512 bytes/sec, 287272960 sec total
sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct fixed
sd1: 70135MB, 512 bytes/sec, 143636480 sec total
scsibus1 at ami0: 16 targets
ahd0 at pci2 dev 3 function 0 "Adaptec AIC-7902B U320" rev 0x10: apic 10
int 2 (irq 10)
ahd0: aic7902, U320 Wide Channel A, PCI 33 or 66MHz, 512 SCBs
scsibus2 at ahd0: 16 targets, initiator 7
sd2 at scsibus2 targ 0 lun 0: <FUJITSU, MAP3367NC, 0108> SCSI3 0/direct
fixed
sd2: 35046MB, 512 bytes/sec, 71775284 sec total
sd3 at scsibus2 targ 1 lun 0: <FUJITSU, MAP3367NC, 0108> SCSI3 0/direct
fixed
sd3: 35046MB, 512 bytes/sec, 71775284 sec total
sd4 at scsibus2 targ 2 lun 0: <FUJITSU, MAP3367NC, 0108> SCSI3 0/direct
fixed
sd4: 35046MB, 512 bytes/sec, 71775284 sec total
sd5 at scsibus2 targ 3 lun 0: <FUJITSU, MAP3367NC, 0108> SCSI3 0/direct
fixed
sd5: 35046MB, 512 bytes/sec, 71775284 sec total
sd6 at scsibus2 targ 4 lun 0: <FUJITSU, MAP3367NC, 0108> SCSI3 0/direct
fixed
sd6: 35046MB, 512 bytes/sec, 71775284 sec total
sd7 at scsibus2 targ 5 lun 0: <FUJITSU, MAP3367NC, 0108> SCSI3 0/direct
fixed
sd7: 35046MB, 512 bytes/sec, 71775284 sec total
ses0 at scsibus2 targ 15 lun 0: <ADAPTEC, AltEvo U320, 0028> SCSI3
3/processor removable
ahd1 at pci2 dev 3 function 1 "Adaptec AIC-7902B U320" rev 0x10: apic 10
int 3 (irq 10)
ahd1: aic7902, U320 Wide Channel B, PCI 33 or 66MHz, 512 SCBs
scsibus3 at ahd1: 16 targets, initiator 7
"Intel 82870P2 IOxAPIC" rev 0x04 at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0 "Intel 82870P2 PCIX-PCIX" rev 0x04
pci3 at ppb2 bus 3
em0 at pci3 dev 1 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: apic
9 int 4 (irq 10), address 00:30:48:76:07:dc
em1 at pci3 dev 2 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: apic
9 int 5 (irq 10), address 00:30:48:76:07:dd
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: apic 8
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801CA/CAM USB" rev 0x02: apic 8
int 19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801CA/CAM USB" rev 0x02: apic 8
int 18 (irq 9)
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x42
pci4 at ppb3 bus 1
vga1 at pci4 dev 4 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CA IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 1
scsibus4 at atapiscsi0: 2 targets
cd0 at scsibus4 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PZ16> ATAPI
5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ichiic0 at pci0 dev 31 function 3 "Intel 82801CA/CAM SMBus" rev 0x02:
apic 8 int 17 (irq 0)
iic0 at ichiic0
admtemp0 at iic0 addr 0x18: Xeon
admtemp1 at iic0 addr 0x1a: Xeon
lm1 at iic0 addr 0x2d: W83627HF
spdmem0 at iic0 addr 0x51: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem1 at iic0 addr 0x52: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem2 at iic0 addr 0x55: 1GB DDR SDRAM registered ECC PC2300CL2.5
spdmem3 at iic0 addr 0x56: 1GB DDR SDRAM registered ECC PC2300CL2.5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb1 at uhci1: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci2: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm2 at wbsio0 port 0x290/8: W83627HF
lm1 detached
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub0 port 1 configuration 1 interface 0 " USB Keyboard" rev
1.10/2.40 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 " USB Keyboard" rev
1.10/2.40 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhidev2 at uhub0 port 2 configuration 1 interface 0 "vendor 0x04f3
USB+PS/2 Optical Mouse" rev 1.10/24.58 addr 3
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
ahd0: target 0 synchronous with period = 0x8, offset = 0x7f(DT|IU|RTI|QAS)
This server is still in testing mode, so it is available to test
anything new.
Thanks!
Jeff Ross
