Hi. I installed a recent -current on an SD MMC card. Boots just fine with an old SanDisk reader, but most times at the time of shutdown (shutdown -h now) the kernel hangs at "Syncing disks.", and I have to power down manually. When it comes back it has to fsck of course. Shut down works fine on a different computer with this SD card (laptop) with a built-in card reader. What may be a problem? My old reader is flaky?
Also unrelated, but I am using FireFox in this install to write this message and it is painfully slow. This is on an Athlon 64 X2 4200+. I am using .mp kernel. Is it supposed to be this slow? It is using about 16% CPU with only one tab open. uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq 255) uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq 255) uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq 255) uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21 (irq 255) ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21 (irq 255) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr ... usb1 at uhci0: USB revision 1.0 uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb2 at uhci1: USB revision 1.0 uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci2: USB revision 1.0 uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1 usb4 at uhci3: USB revision 1.0 uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1 ... umass0 at uhub0 port 1 configuration 1 interface 0 "SanDisk ImageMate 9 in 1 Reader/Writer" rev 2.00/93.35 addr 2 umass0: using SCSI over Bulk-Only scsibus2 at umass0: 2 targets, initiator 0 sd0 at scsibus2 targ 1 lun 0: <Generic, STORAGE DEVICE, 9335> SCSI0 0/direct removable sd0: 3814MB, 512 bytes/sec, 7811072 sec total Thanks.
