damien.bergam...@free.fr wrote:
[...]
Yes, please run "ifconfig athn0 debug" before you scan (from the console),
and send me the output.
Damien
Thanks Damien and Stuart, your suggestions are so much cheaper than
shipping to France. BTW, this was all done at the console, no X.
I tried it with 'ifconfig athn0 debug' and the result is the same when I
scan. After I run 'ifconfig athn0 scan' I can hit return for about 3
seconds before the machine hard locks.
Thanks again,
noah
# ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33200
priority: 0
groups: lo
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:23:8b:f1:4b:f3
priority: 0
groups: egress
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet6 fe80::223:8bff:fef1:4bf3%re0 prefixlen 64 scopeid 0x1
inet 10.0.0.38 netmask 0xffffff00 broadcast 10.0.0.255
athn0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:26:5e:29:29:5b
priority: 4
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
enc0: flags=0<> mtu 1536
priority: 0
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33200
priority: 0
groups: pflog
# ifconfig athn0 debug
# ifconfig athn0 scan
athn0: flags=8806<BROADCAST,DEBUG,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:26:5e:29:29:5b
priority: 4
groups: wlan
media: IEEE802.11 autoselect
status: no network
ieee80211: nwid ""
<3-5 seconds of nothing else printed and then it's power button time>
************************************************
OpenBSD 4.7-current (GENERIC) #605: Thu Apr 15 11:56:53 MDT 2010
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor L110 ("AuthenticAMD" 686-class, 512KB L2
cache) 1.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16
real mem = 1877372928 (1790MB)
avail mem = 1808224256 (1724MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/18/09, BIOS32 rev. 0 @ 0xfd9a0,
SMBIOS rev. 2.4 @ 0xf10d0 (17 entries)
bios0: vendor Phoenix Technologies LTD version "v1.3201" date 06/18/2009
bios0: Gateway LT31
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG HPET BOOT SLIC
acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI(S3) HDAU(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB3_)
acpiprt2 at acpi0: bus -1 (PB4_)
acpiprt3 at acpi0: bus 3 (PB5_)
acpiprt4 at acpi0: bus 4 (PB6_)
acpiprt5 at acpi0: bus -1 (PB7_)
acpiprt6 at acpi0: bus 9 (P2P_)
acpiprt7 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 100 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "UM09B7C" serial 2545 type LION oem "SIMPLO"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT1
acpivout2 at acpivideo0: TV__
acpivout3 at acpivideo0: DFP1
bios0: ROM list: 0xc0000/0xd800 0xd0000/0x1c00! 0xd4000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon X1250 IGP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00
pci2 at ppb1 bus 3
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
(0x2480), apic 1 int 17 (irq 5), address 00:23:8b:f1:4b:f3
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00
pci3 at ppb2 bus 4
athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 1 int 18
(irq 11), address 00:26:5e:29:29:5b
athn0: AR9285 rev 2 (1T1R), ROM rev 13
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int 22
(irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK2555GS, FG00> SCSI3
0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int 16
(irq 10), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int 17
(irq 5), version 1.0, legacy support
ohci2 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int 17
(irq 5), version 1.0, legacy support
ohci3 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int 18
(irq 11), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int 19
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 1
int 16 (irq 10)
azalia0: codecs: Realtek ALC272
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci4 at ppb3 bus 9
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core
rev DH-G2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. CNF9011" rev 2.00/13.57 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
