Corey Bukolt wrote:
Yes, please recompile a kernel after changing the value of athn_debug
in /usr/src/sys/dev/ic/athn.c to 10:
int athn_debug = 0;
->
int athn_debug = 10;
Then reboot and send me the dmesg.
The AR9285 works for several people so it is very likely a difference
in chip or EEPROM revision that triggers different code paths.
Damien
Here is mine. Source was updated from cvs prior to compiling. Thanks.
OpenBSD 4.7-current (GENERIC) #0: Tue Apr 20 08:20:05 PDT 2010
r...@sw1.example.com:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) Processor L110 ("AuthenticAMD" 686-class, 512KB L2
cache) 1.20 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16
real mem = 1877372928 (1790MB)
avail mem = 1810014208 (1726MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/18/09, BIOS32 rev. 0 @ 0xfd9a0,
SMBIOS rev. 2.4 @ 0xf10d0 (17 entries)
bios0: vendor Phoenix Technologies LTD version "v1.3201" date 06/18/2009
bios0: Gateway LT31
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG HPET BOOT SLIC
acpi0: wakeup devices PB5_(S5) OHC1(S3) OHC2(S3) EHCI(S3) HDAU(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 21, 24 pins
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB3_)
acpiprt2 at acpi0: bus -1 (PB4_)
acpiprt3 at acpi0: bus 3 (PB5_)
acpiprt4 at acpi0: bus 4 (PB6_)
acpiprt5 at acpi0: bus -1 (PB7_)
acpiprt6 at acpi0: bus 9 (P2P_)
acpiprt7 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 100 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "UM09B7C" serial 2545 type LION oem "SIMPLO"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: PWRB
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT1
acpivout2 at acpivideo0: TV__
acpivout3 at acpivideo0: DFP1
bios0: ROM list: 0xc0000/0xd800 0xd0000/0x1c00! 0xd4000/0x1000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "ATI RS690 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "ATI RS690 PCIE" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Radeon X1250 IGP" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 5 function 0 "ATI RS690 PCIE" rev 0x00
pci2 at ppb1 bus 3
re0 at pci2 dev 0 function 0 "Realtek 8101E" rev 0x02: RTL8102EL
(0x2480), apic 1 int 17 (irq 5), address 00:23:8b:f1:4b:f3
rlphy0 at re0 phy 7: RTL8201L 10/100 PHY, rev. 1
ppb2 at pci0 dev 6 function 0 "ATI RS690 PCIE" rev 0x00
pci3 at ppb2 bus 4
athn0 at pci3 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 1 int 18
(irq 11)Tx gain type=0x0
, address 00:26:5e:29:29:5b
Found RF switch connected to GPIO pin 0
128 key cache entries
using closed loop power control
txchainmask=0x1 rxchainmask=0x1
athn0: AR9285 rev 2 (1T1R), ROM rev 13
ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 1 int 22
(irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK2555GS, FG00> SCSI3
0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 1 int 16
(irq 10), version 1.0, legacy support
ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 1 int 17
(irq 5), version 1.0, legacy support
ohci2 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 1 int 17
(irq 5), version 1.0, legacy support
ohci3 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 1 int 18
(irq 11), version 1.0, legacy support
ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 1 int 19
(irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x14: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 1
int 16 (irq 10)
azalia0: codecs: Realtek ALC272
audio0 at azalia0
pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00
ppb3 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci4 at ppb3 bus 9
pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00
kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core
rev DH-G2
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci3: USB revision 1.0
uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. CNF9011" rev 2.00/13.57 addr 2
video0 at uvideo0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
