On 10/07/10 18:24, Dmitrij D. Czarkoff wrote:
> Should I conclude nobody else gets this?
>
> (The story was about install48.iso from 05-Oct-2010 hanging on boot with no
> error message when encountering a misbehaving device that was simply disabled
> in august snapshots and previous releases).
Well, you did kinda lead people down a very strange path, with no
details until your FOURTH message in the thread.
As for having this happen, uh...actually, I believe I have never plugged
a CDROM drive into my netbook (first generation Acer Aspire One, looks
like your is second generation). hm. come to think of it, the only time
I saw a DVD-RAM disk (on a desktop), it hung there, too. I just assumed
it was a bad drive (actually, the drive made noises that made me pretty
sure it was bad, but maybe there was more...)
I would recommend upgrading via other means (bsd.rd -> network install,
or copy files to local hd or USB flash drive first, whatever), and
investigate then if the problem exists with the GENERIC kernel or if it
is just a bsd.rd issue.
Nick.
>
> Dmitrij D. Czarkoff <czark...@gmail.com> wrote:
>
>> Matthew Dempsky <matt...@dempsky.org> wrote:
>> >
>> > Some more details would be helpful. E.g., at least a dmesg from your
>> > working 4.7 install, and if you could transcribe at least the last few
>> > lines of dmesg output from booting install48.iso (e.g., did it panic
>> > or just hang?) that would go a long way.
>>
>> My 4.7 dmesg:
>>
>> OpenBSD 4.7-stable (GENERIC.MP) #0: Thu Jul 22 09:31:34 MSD 2010
>> r...@ao531h.bedova:/usr/src/sys/arch/i386/compile/GENERIC.MP
>> RTC BIOS diagnostic error 80<clock_battery>
>> cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
>> GHz
>> cpu0:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
>> real mem = 1060163584 (1011MB)
>> avail mem = 1018466304 (971MB)
>> RTC BIOS diagnostic error 80<clock_battery>
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 10/06/08, SMBIOS rev. 2.4 @ 0xe90b0
>> (31 entries)
>> bios0: vendor Acer version "v0.3110" date 10/06/2008
>> bios0: Acer AO531h
>> acpi0 at bios0: rev 2
>> acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! SLIC BOOT
>> acpi0: wakeup devices P32_(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3)
>> EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0)
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpihpet0 at acpi0: 14318179 Hz
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: apic clock running at 132MHz
>> cpu1 at mainbus0: apid 1 (application processor)
>> cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz ("GenuineIntel" 686-class) 1.60
>> GHz
>> cpu1:
>> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR
>> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
>> ioapic0: misconfigured as apic 0, remapped to apid 4
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 4 (P32_)
>> acpiprt2 at acpi0: bus 1 (EXP1)
>> acpiprt3 at acpi0: bus -1 (EXP2)
>> acpiprt4 at acpi0: bus 2 (EXP3)
>> acpiprt5 at acpi0: bus 3 (EXP4)
>> acpiec0 at acpi0
>> acpicpu0 at acpi0: C3, C2, C1, PSS
>> acpicpu1 at acpi0: C3, C2, C1, PSS
>> acpitz0 at acpi0: critical temperature 95 degC
>> acpibtn0 at acpi0: PWRB
>> acpibtn1 at acpi0: LID0
>> acpibtn2 at acpi0: SLPB
>> acpibat0 at acpi0: BAT1 not present
>> acpiac0 at acpi0: AC unit online
>> acpivideo0 at acpi0: OVGA
>> acpivout0 at acpivideo0: CRT1
>> acpivout1 at acpivideo0: DTV1
>> acpivout2 at acpivideo0: DFP1
>> acpivout3 at acpivideo0: LCD_
>> acpivout4 at acpivideo0: DTV2
>> acpivout5 at acpivideo0: DFP2
>> bios0: ROM list: 0xc0000/0xec00!
>> cpu0: Enhanced SpeedStep 1596 MHz: speeds: 1600, 1333, 1066, 800 MHz
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "Intel 82945GME Host" rev 0x03
>> vga1 at pci0 dev 2 function 0 "Intel 82945GME Video" rev 0x03
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> intagp0 at vga1
>> agp0 at intagp0: aperture at 0x40000000, size 0x10000000
>> inteldrm0 at vga1: apic 4 int 16 (irq 11)
>> drm0 at inteldrm0
>> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
>> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 4
>> int 16 (irq 11)
>> azalia0: codecs: Realtek ALC272
>> audio0 at azalia0
>> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 4 int 16
>> (irq 255)
>> pci1 at ppb0 bus 1
>> ale0 at pci1 dev 0 function 0 "Attansic Technology L1E" rev 0xb0: AR8113,
>> apic 4 int 16 (irq 11), address 00:26:9e:00:53:d1
>> atphy0 at ale0 phy 0: F1 10/100/1000 PHY, rev. 9
>> ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 4 int 18
>> (irq 255)
>> pci2 at ppb1 bus 2
>> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5150" rev 0x00: apic 4 int 18
>> (irq 11), MIMO 1T2R, ABG, address 00:16:eb:0e:7d:62
>> ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 4 int 19
>> (irq 255)
>> pci3 at ppb2 bus 3
>> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 4 int 16
>> (irq 11)
>> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 4 int 17
>> (irq 11)
>> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 4 int 18
>> (irq 11)
>> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 4 int 19
>> (irq 11)
>> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 4 int 16
>> (irq 11)
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
>> pci4 at ppb3 bus 4
>> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
>> pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel
>> 0 configured to compatibility, channel 1 configured to compatibility
>> pciide0: channel 0 disabled (no drives)
>> pciide0: channel 1 ignored (disabled)
>> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 4 int
>> 17 (irq 11), AHCI 1.1
>> scsibus0 at ahci0: 32 targets
>> sd0 at scsibus0 targ 0 lun 0: <ATA, ST9160310AS, 0303> SCSI3 0/direct fixed
>> sd0: 152627MB, 512 bytes/sec, 312581808 sec total
>> ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 4 int
>> 17 (irq 11)
>> iic0 at ichiic0
>> spdmem0 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
>> usb1 at uhci0: USB revision 1.0
>> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb2 at uhci1: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at uhci2: USB revision 1.0
>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb4 at uhci3: USB revision 1.0
>> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at ichpcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pms0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pcppi0 at isa0 port 0x61
>> midi0 at pcppi0: <PC speaker>
>> spkr0 at pcppi0
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> mtrr: Pentium Pro MTRR support
>> uvideo0 at uhub0 port 1 configuration 1 interface 0 "Sonix Technology Co.,
>> Ltd. WebCam" rev 2.00/1.00 addr 2
>> video0 at uvideo0
>> umass0 at uhub0 port 3 configuration 1 interface 0 "Cypress Semiconductor
>> USB2.0 Storage Device" rev 2.00/0.01 addr 3
>> umass0: using SCSI over Bulk-Only
>> scsibus1 at umass0: 2 targets, initiator 0
>> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PR03> SCSI0
>> 5/cdrom removable
>> uhub0: port 7, set config at addr 4 failed
>> uhub0: device problem, disabling port 7
>> vscsi0 at root
>> scsibus2 at vscsi0: 256 targets
>> softraid0 at root
>> root on sd0a swap on sd0b dump on sd0b
>>
>> install48.iso hangs after the line:
>>
>> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T10N, PR03> SCSI0
>> 5/cdrom removable
>>
>> Which is a USB CD drive containing the installation medium. The same drive
>> was
>> used for 4.7 install.
>>
>> Actually, the following lines in my 4.7 dmesg (the first lines not present in
>> install4.8.iso dmesg) refer to some device I can't identify for sure, but I
>> believe it's a built-in bluetooth device:
>>
>> uhub0: port 7, set config at addr 4 failed
>> uhub0: device problem, disabling port 7
>>
>> --
>> Dmitrij D. Czarkoff
