http://tothelasttribe.com/blog/2009/04/building-a-firewall-pfsense-on-an-alix-2d3/ http://blog.innerewut.de/2005/05/14/openbsd-3-7-on-wrap
On 16:24 Thu 18 Nov , Sergey Bronnikov wrote: > it is not a hang. > Just disabled output to serial console. > > You should add lines: > set tty com0 > stty com0 57600 > to /etc/boot.conf > > On 07:31 Thu 18 Nov , Frank Bax wrote: > > I installed 4.7 to a CF card via usb connector on HP D530. I then > > inserted CF card into a new ALIX system with serial console. > > > > Boot process hangs with both bsd.sp and bsd.rd (see below). > > > > What is my next step in determining the problem here? > > > > > > PC Engines ALIX.2 v0.99h > > 640 KB Base Memory > > 261120 KB Extended Memory > > > > 01F0 Master 044A ULTIMATE CF CARD 16GB > > Phys C/H/S 16383/16/63 Log C/H/S 1856/255/63 LBA > > Using drive 0, partition 3. > > Loading... > > probing: pc0 com0 com1 pci mem[640K 255M a20=on] > > disk: hd0+ > > >> >> OpenBSD/i386 BOOT 3.02 > > boot> boot bsd.rd > > booting hd0a:bsd.rd: 5864788+916112 [52+221040+208132]=0x6e0600 > > entry point at 0x200120 > > > > -- > sergeyb@ -- sergeyb@