Thanks. I've done this on another system; but forgot this time.
Also need to change /etc/ttys if login via serial console is desired.
On 11/18/10 08:24, Sergey Bronnikov wrote:
it is not a hang.
Just disabled output to serial console.
You should add lines:
set tty com0
stty com0 57600
to /etc/boot.conf
On 07:31 Thu 18 Nov , Frank Bax wrote:
I installed 4.7 to a CF card via usb connector on HP D530. I then
inserted CF card into a new ALIX system with serial console.
Boot process hangs with both bsd.sp and bsd.rd (see below).
What is my next step in determining the problem here?
PC Engines ALIX.2 v0.99h
640 KB Base Memory
261120 KB Extended Memory
01F0 Master 044A ULTIMATE CF CARD 16GB
Phys C/H/S 16383/16/63 Log C/H/S 1856/255/63 LBA
Using drive 0, partition 3.
Loading...
probing: pc0 com0 com1 pci mem[640K 255M a20=on]
disk: hd0+
OpenBSD/i386 BOOT 3.02
boot> boot bsd.rd
booting hd0a:bsd.rd: 5864788+916112 [52+221040+208132]=0x6e0600
entry point at 0x200120
