Hi,
As a follow-up to my previous mail, here is what I could give a deeper look to:
- I started the building process from the beginning on another computer with
the same configuration, except for the OS which was Microsoft Windows 7
(service pack 1, x64). I didn't encounter the same error and was able to
successfully launch the Workbench with the simulation plugin on.
- I tried to suppress everything related to MITK on the computer running under
Windows 10 and started once more, in case there would have been a conflict I
would not have been aware of. Once again I was able to go through all the
building process without any error, but encountered the same problem ( memory
access violation) when running the Workbench.
- I finally updated my Windows 10 version with the anniversary update (version
1607, build 14393), but this was also unsuccessful.
Considering these elements I would say the problem is likely to come either
from windows 10 or from conflicting files on my computer I couldn't find.
Were you running on Windows 10 when you tried to reproduce the error? Or do you
know if a test has been made recently on Windows 10 (I saw it was part of the
Tier 2 supported platforms)?
Otherwise the problem must be specifically related to something on my computer.
Regards,
Camille
----- Original Message -----
From: "Camille Krewcun" <camille_krew...@orange.fr>
To: "Stefan Dinkelacker" <s.dinkelac...@dkfz-heidelberg.de>
Cc: mitk-users@lists.sourceforge.net
Sent: Mercredi 1 Février 2017 16:18:41
Subject: Re: [mitk-users] [Simulation plugin] Execution error at plugin loading
Hi Stefan,
Thanks for your answer!
I did exactly the same as you described in the first two lines of your message
(and encountered the same forced switch on for the Boost libraries).
As for the things that could have gone wrong:
- I didn't encounter any error during the superbuild (although warnings were
triggered), and everything was built successfully
- I used the debug batch file (StartVS_debug.bat) to launch the Workbench after
compiling in Debug mode. I also tried to do all the building process in Release
mode (also following the same steps as you described), using this time the
release batch file, and apparently encountered what seems to be the same error.
- I checked that both simulation plugins (org.mitk.simulation and
org.gui.qt.simulation) were indeed switched on
I finally tried to delete all the Workbench folders in the AppData directory
but I still encounter the same error, although not with the same callstack as
plugins were directly loaded (and not updated). However a call to the
insertArchive method is also made during this loading process, and it triggers
the error when used relatively to the org.mitk.simulation plugin.
I made a lot of manipulations relatively to MITK lately, and I'm not sure that
I'm not missing anything. I'll try to reproduce the problem in a "clean"
machine, starting from 2016.03 sources only, and going through the entire
building process.
I'll keep you updated if I encounter the error once more.
Best,
Camille
----- Original Message -----
From: "Stefan Dinkelacker" <s.dinkelac...@dkfz-heidelberg.de>
To: "Camille Krewcun" <camille_krew...@orange.fr>,
mitk-users@lists.sourceforge.net
Sent: Mercredi 1 Février 2017 15:15:18
Subject: RE: [mitk-users] [Simulation plugin] Execution error at plugin loading
Hi,
I have just done a superbuild with your setup (2016.03, CMake 3.7, VS 2013
Community Update 5, and Qt 5.4.2). I switched on MITK_USE_SOFA in the
superbuild. Boost with a few libraries were force switched on then. I
configured again and generated the superbuild solution. I built the project
MITK-Configure in Debug Configuration, and then switched in CMake to the
MITK-build directory to switch on the two simulation plugins.
Configure/Gerenrate. I used the debug batch file (!) to open the MITK solution
and built/run MITKWorkbench. So everything works for me.
Thing that might have gone wrong in your case:
- Did you check, that the superbuild was completely successful?
- Did you use the right batch file to open the MITK solution?
- Did you switch on both simulation plugins?
- If you’re sure that everything was built successfully, you can either go to
%APP_DATA%/../Local/DKFZ and delete all the Workbench folders to force a clean
start of the Workbench, or pass /BlueBerry.clean once as argument to the
Workbench, which will do the same (remember to remove the argument later). You
can add the argument in the properties of the MITKWorkbench project
(Configuration Properties -> Debugging -> Command Arguments).
Best
Stefan
From: Camille Krewcun [mailto:camille_krew...@orange.fr]
Sent: Dienstag, 31. Januar 2017 17:54
To: mitk-users@lists.sourceforge.net
Subject: [mitk-users] [Simulation plugin] Execution error at plugin loading
Hello everyone,
I encounter an execution error (memory access violation) when trying to launch
MITK Workbench with the simulation plugin.
This error seems to result from a call to the insertArchive method of
ctkPluginStorageSQL (relatively to org.mitk.simulation plugin), through the
updateDB method. However I have difficulties to trace back the exact cause of
the problem through the plugin loading process.
Has this situation been encountered before?
I leave more information concerning the error and my environment below.
Best regards,
Camille
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Build information:
Working on Microsoft Windows 10 Professional (original version 10240)
MITK 2016.03 release sources
CMake 3.7.0
Visual Studio 2013 Community (Update 5)
Qt 5.4.2
All third party libraries automatically downloaded and built during MITK
superbuild
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Error message:
" Unhandled exception at 0x00007FFF19064FF5 (SofaCore_1_0d.dll) in
MitkWorkbench.exe: 0xC0000005: Access violation reading location
0x00007FFF0A90F530. "
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Callstack when error is triggered:
> SofaCore_1_0d.dll!boost::detail::sp_counted_base::release() Line 103
SofaCore_1_0d.dll!boost::detail::shared_count::~shared_count() Line 471
[External Code]
SofaCore_1_0d.dll!boost::checked_delete<sofa::core::ObjectFactory::ClassEntry>(sofa::core::ObjectFactory::ClassEntry
* x) Line 34
SofaCore_1_0d.dll!boost::detail::sp_counted_impl_p<sofa::core::ObjectFactory::ClassEntry>::dispose()
Line 79
SofaCore_1_0d.dll!boost::detail::sp_counted_base::release() Line 104
SofaCore_1_0d.dll!boost::detail::shared_count::~shared_count() Line 471
[External Code]
SofaCore_1_0d.dll!sofa::core::ObjectFactory::~ObjectFactory() Line 37
[External Code]
Qt5Cored.dll!QLibraryPrivate::unload_sys() Line 150
Qt5Cored.dll!QLibraryPrivate::unload(QLibraryPrivate::UnloadFlag flag) Line 549
Qt5Cored.dll!QPluginLoader::unload() Line 256
CTKPluginFramework.dll!ctkPluginStorageSQL::insertArchive(QSharedPointer<ctkPluginArchiveSQL>
pa, QSqlQuery * query) Line 491
CTKPluginFramework.dll!ctkPluginStorageSQL::updateDB() Line 333
CTKPluginFramework.dll!ctkPluginStorageSQL::open() Line 179
CTKPluginFramework.dll!ctkPluginStorageSQL::ctkPluginStorageSQL(ctkPluginFrameworkContext
* framework) Line 64
CTKPluginFramework.dll!ctkPluginFrameworkContext::init() Line 161
CTKPluginFramework.dll!ctkPluginFrameworkPrivate::init() Line 56
CTKPluginFramework.dll!ctkPluginFramework::start(const QFlags<enum
ctkPlugin::StartOption> & options) Line 112
CTKPluginFramework.dll!ctkPluginFrameworkLauncher::startup(QRunnable *
__formal) Line 521
CTKPluginFramework.dll!ctkPluginFrameworkLauncher::run(QRunnable *
endSplashHandler, const QVariant & argument) Line 425
MitkAppUtil.dll!mitk::BaseApplication::main(const
std::vector<std::basic_string<char,std::char_traits<char>,std::allocator<char>
>,std::allocator<std::basic_string<char,std::char_traits<char>,std::allocator<char>
> > > & args) Line 686
PocoUtild.dll!Poco::Util::Application::run() Line 333
MitkAppUtil.dll!mitk::BaseApplication::run() Line 784
MitkWorkbench.exe!main(int argc, char * * argv) Line 41
[External Code]
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
mitk-users mailing list
mitk-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/mitk-users
