I agree with Holland on this. I also have ND wires on my 16v. One minor quibble: the coil wire is far too long for the A2 cars. Apparently the length is necessary for the Scirocco 16v. IMHO, ND should make two sets.
Chris Williams [email protected] -----Original Message----- From: Holland J. Phillips [SMTP:[email protected]] Sent: Wednesday, February 02, 2000 5:19 PM To: jimvish; [email protected] Subject: Re: Impulse sender/New wires > Ok, I'm looking for a new set of plug wires, and I was wondering what kind > you guys have the best experience or like the best. I also need to know how > to get the impulse sender off of the stock wires and onto the new set. I run New Dimensions 8mm wires on my '92 16V and my '97 VR6. They use factory Beru ends, and very high quality silicone wire. The impulse sender should just slide right off the old wire, and will require a little enlargement for the 8mm wires. Just select a drill bit slightly larger than 8mm, and ream out the hole in the sender. --Holland Forced Failure Racing Don't Ask MotorSports [email protected] a2_16V List Owner [email protected] San Jose, California _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
