Hello,
Does anyone have any tricks on aligning the transmission shaft into the
flywheel. I having a bit of trouble and cant get it started. Have turned the
flywheel around wgile trying to align..but no luck..
any suggestions??
Thanks
Mike Ingram
89 gti 16v
92 RS camaro
00 Jeep Wr.sprt
----- Original Message -----
From: John S. Lagnese
Sent: Thursday, June 10, 2004 8:37 PM
To: MICHAEL INGRAM
Subject: Re: [a2-16v-list] Clutch question...flywheel bolts
I have always used it on both. You really get back to retighten those. I've
never greased any of that, or do you mane on the push plate where the rod goes?
----- Original Message -----
From: MICHAEL INGRAM
To: John S. Lagnese
Sent: Wednesday, June 09, 2004 11:35 PM
Subject: Re: [a2-16v-list] Clutch question...flywheel bolts
Hello,
Someone did say to use loctite but, was that on the flywheel bolts as well as
the prssure plate?I didnt know about the flywheel bolts. I have to go tomorrow
and find replacement bolts for both the pressure plate mounting bolts and the
12 flywheel bolts. Hopefully I wont have to take a roadtrip to a VW dealer.
Also what type of grease is needed during the reassembly? My pressure plate
was hard as hell to get off..first the mounting bolts were very very
tight..then the pressure plate was majorly stuck in place. Either way it came
off.
Thanks
Mike
----- Original Message -----
From: John S. Lagnese
Sent: Wednesday, June 09, 2004 6:39 PM
To: MICHAEL INGRAM
Subject: Re: [a2-16v-list] Clutch question...flywheel bolts
Did anyone say to use loctite on all bolts going back in the flywheel and
pressure plate?
----- Original Message -----
From: MICHAEL INGRAM
To: John S. Lagnese
Sent: Tuesday, June 08, 2004 9:43 AM
Subject: Re: [a2-16v-list] Clutch question...flywheel bolts
Hello,
It is a 9mm 12 pt. I bought and used and worked fine. I did not try an 11/32
but I will next time my 9mm 12 pt is missing.
Thanks again for your help,
Mike
----- Original Message -----
From: John S. Lagnese
Sent: Monday, June 07, 2004 10:00 PM
To: MICHAEL INGRAM; a2-16v-list
Subject: Re: [a2-16v-list] Clutch question...flywheel bolts
I use an 11/32 12 pt socket. Fits nicely!
----- Original Message -----
From: "MICHAEL INGRAM" <[email protected]>
To: "a2-16v-list" <[email protected]>
Sent: Monday, June 07, 2004 12:08 AM
Subject: [a2-16v-list] Clutch question...flywheel bolts
Hi All,
Does anyone know what type of tool is needed to remove the bolts in the
flywheel. I dont think (but i may be wrong), they are regular 12 pt socket.
Time to get up on this job that i originally started a year ago.
This ofcourse is my 89 gti 16v
Many Thanks,
Mike
89 gti 16v
00 jeep wr sprt
92 Rs camaro
_______________________________________________
a2-16v-list mailing list
[email protected]
http://mail.a2-16vcom/mailman/listinfo/a2-16v-list
For list archives, see listinfo link above.
