When I pulled the plug wires off my Jetta GTX to test on the Passat 16V I took the whole Cap with wires attached. The wires are in very good shape and the cap looks great. The setup kicks ass in my Jetta, but still mis fired in my Passat.
One thing I will do is to check for spark on plug wire #2. I'll keep you all updated. Mark. ----- Original Message ----- From: "John S. Lagnese" <[email protected]> To: "Mark Reda" <[email protected]>; "a2list" <[email protected]> Sent: Friday, July 16, 2004 3:24 AM Subject: Re: [a2-16v-list] Passat 16V: Mis Firing > Compression? > ----- Original Message ----- > From: "Mark Reda" <[email protected]> > To: "a2list" <[email protected]> > Sent: Thursday, July 15, 2004 7:35 PM > Subject: [a2-16v-list] Passat 16V: Mis Firing > > > I did a little checking around under the hood of the Passat. > It appears that cylinder 2 is not firing. I unplugged spark plug wires one > at a time and it didn't make a difference when I pulled plug wire #2. > I pulled the spark plug out and it was covered in gas. I changed the plug > wires with the ones on my Jetta and even replaced the spark plug with a > spare I had around. > It still mis fired on cylinder 2. > > hmmmmmmmm > > Mark. > _______________________________________________ > a2-16v-list mailing list > [email protected] > http://mail.a2-16v.com/mailman/listinfo/a2-16v-list > For list archives, see listinfo link above. > >
