> Could you edit the huawei port type rules file and add these three lines
> somewhere in the middle of the other rules?
> $ vim /lib/udev/rules.d/77-mm-huawei-net-port-types.rules
> SUBSYSTEMS=="usb", ATTRS{bInterfaceNumber}=="?*",
> ENV{.MM_USBIFNUM}="$attr{bInterfaceNumber}"
> ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="15c1", ENV{.MM_USBIFNUM}=="02",
> ENV{ID_MM_PORT_TYPE_PPP}="1"
> ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="15c1", ENV{.MM_USBIFNUM}=="04",
> ENV{ID_MM_PORT_TYPE_AT_PRIMARY}="1"
I think you misspelled ID_MM_PORT_TYPE_PPP. Should it be named
ID_MM_PORT_TYPE_AT_PPP?
I have changed the rules file and restarted mm and nm in debug mode. Waiting
for disconnection issues.
> You could try to test that running this:
>
> $ sudo usb_modeswitch -v 12d1 -p 15c1 --configuration 3
I issued that command on a different device without the mm patch you gave me. I
get this:
root@f14c40f:~# usb_modeswitch -v 12d1 -p 15c1 --configuration 3
Look for default devices ...
product ID matched
Get the current device configuration ...
Found devices in default mode (1)
Access device 004 on bus 001
Get the current device configuration ...
Current configuration number is 2
Use interface number 0
with class 2
USB description data (for identification)
-------------------------
Manufacturer: Huawei Technologies Co., Ltd.
Product: HUAWEI Mobile V7R11
Serial No.: 0123456789ABCDEF
-------------------------
Change configuration to 3 ...
Device is busy, try to detach kernel driver
Looking for active driver ...
No active driver found. Detached before or never attached
Device is busy, try to detach kernel driver
Looking for active driver ...
No active driver found. Detached before or never attached
Device is busy, try to detach kernel driver
Looking for active driver ...
No active driver found. Detached before or never attached
Device is busy, try to detach kernel driver
Looking for active driver ...
No active driver found. Detached before or never attached
Changing the configuration failed (error -6). Try to continue
-> Run lsusb to note any changes. Bye!
> After that, the module should re-enumerate using MBIM.
How could I check that? The modeswitch output looked like a failure.
> I assume your setup has libmbim and ModemManager installed with MBIM support
> as well, right?
I have
./usr/lib/libmbim-glib.so.4
./usr/lib/libmbim-glib.so.4.4.0
Merry Christmas
Bruno
--
Aleksander
https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Faleksander.es&data=02%7C01%7C%7C16c4d3d9a796431839b808d78781e9f9%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637126864354256369&sdata=q4e81CnjdIE0p5OiMJd777pMwioLoJSsBB0Z1Ydlq5w%3D&reserved=0
_______________________________________________
ModemManager-devel mailing list
ModemManager-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/modemmanager-devel
