Runners & timber wedges should be the same - problem is swopping over the seatbelt sockets as they will need to be on the opposite side
Regards, Jon _____ From: Richard Jones [mailto:[email protected]] Sent: 14 August 2012 18:14 To: mogtalk2 Subject: [mogtalk2] Swapping Seats Its never really occured to me before and I haven't looked closely, but as the bolster on my drivers seat is getting a bit worn and polished, can the seat be swapped over with the passenger seat. It's a 95 +8 and has fixed back bucket seats. Do the runners and wedges have to stay as they bolt through fixed holes in the floor, or are both runners identical. If it is possible I wish I had thought before as both seats were taken out to fit the trailing arms - but at least the nuts are new. Richard M800RGN+8 ------------------------------------------- View posts on The Mail Archive http://www.mail-archive.com/[email protected]/ [http://www.mail-archive.com/[email protected]/] Modify Your Subscription: https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8 Powered by Listbox: http://www.listbox.com
