Re: [mogtalk2] Swapping Seats

[Roger Tatton]

Title: Signature 1

There is also a cut-out in the outside corner of each seat frame, to clear the front spring hanger when slid right back. Roger -- On 14/08/2012 18:20, Jon Mark wrote: Runners & timber wedges should be the same – problem is swopping over the seatbelt sockets as they will need to be on the opposite side   Regards,  Jon From: Richard Jones [mailto:richardjones.h...@btinternet.com] Sent: 14 August 2012 18:14 To: mogtalk2 Subject: [mogtalk2] Swapping Seats   Its never really occured to me before and I haven't looked closely, but as the bolster on my drivers seat is getting a bit worn and polished, can the seat be swapped over with the passenger seat. It's a 95 +8 and has fixed back bucket seats. Do the runners and wedges have to stay as they bolt through fixed holes in the floor, or are both runners identical. If it is possible I wish I had thought before as both seats were taken out to fit the trailing arms - but at least the nuts are new. Richard M800RGN+8  View posts on The Mail Archive http://www.mail-archive.com/mogtalk2@listbox.com/ Modify Your Subscription