I was a bit worried about tales of front suspension wear, when we first bought 
PXY, as figures of only 20,000 to 25,000 miles were bandied about.

However, having run an elderly Land-Rover these past twenty years, I long ago 
acquired the habit of enthusiastic (some would say berserk) application of a 
grease gun.  So from the outset, I greased the front suspension like a mad 
thing, and it does appear to have worked quite well.  First complete suspension 
rebuild was at 104,000 miles, and then only because we had it all apart to 
replace sagging main springs and a broken rebound (they take a beating on the 
potholes of East Devon), and it seemed false economy to reuse the old kingpins 
&c., even though they probably had a bit more life left in them if we'd 
insisted.  


Rebuild included fitting nipples on top, where none were before, so that should 
help.

Grease used is always standard LM type.

All the best
Philip


Philip Watson
PXY 917

www.flickr.com/rpw934

 


From: [email protected]
To: [email protected]
Subject: Re: [mogtalk2] Front Suspension Grease - Which type?
Date: Sat, 21 Apr 2012 14:30:24 +0100








Hamish,
Yes EP2 grease is fine for the job. The normal stuff for 
greasing the front suspension, as recommended by Morgan, is a lithium base 
general purpose, high dropping-point automotive grease - this fits into 
that category. 
 
A better choice is one containing molybdenum disulphide 
(e.g. Castrol Moly grease), as this is excellent for sliding, as opposed to 
rotating motion. The main problem is that it's messier, though it wipes off 
hands easily. It is better to grease regularly with a normal grease than less 
often with a fancy one. Both wash off just metal as easily, as they are 
lithium soap based, although SWMBO might not agree that they come out of 
clothes 
so easily.
 
Regards,
Owen.
 
----- Original Message ----- 

  From: 
  Hamish Gibson 
  To: mogtalk2 
  Sent: Saturday, April 21, 2012 6:13 
  AM
  Subject: [mogtalk2] Front Suspension 
  Grease - Which type?
  

  More help with my ignorance, please. Is EP2 grease suitable for 
  the front suspension of my 2006 4/4? I can't see any spec for this in the 
  handbook.
 
Regards
 
Hamish Gibson

  
  View posts on The 
  Mail Archive http://www.mail-archive.com/[email protected]/
  
    
    
      Modify 
        Your Subscription
      
  No virus found in this 
  message.
Checked by AVG - www.avg.com
Version: 2012.0.1913 / Virus 
  Database: 2411/4950 - Release Date: 04/21/12
View posts on The Mail Archive http://www.mail-archive.com/[email protected]/

  
    
      
      Modify
 Your Subscription


      
    
  

                                          


-------------------------------------------
View posts on The Mail Archive
http://www.mail-archive.com/[email protected]/ 
[http://www.mail-archive.com/[email protected]/]

Modify Your Subscription: 
https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8
Powered by Listbox: http://www.listbox.com

Reply via email to