Hi John, My 4/4 has a Silver-top Zetec but is a 1997 so there may be slight differences. I fitted a Librands exhaust a few years ago leaving the original CAT in place, there was/is no heat shield. Lawrence
-----Original Message----- From: John Porter [mailto:[email protected]] Sent: Tuesday, April 24, 2012 9:34 PM To: mogtalk2 Subject: [mogtalk2] 1.8 zetec help needed Hi all, I'm in the process of fitting a new Librands exhaust on my 2000 1.8 zetec 4/4 and on checking the cat it seems to have a heat shield attached to it. It's wrapped round the cat and held on by a bolted band. The position it is in doesn't seem to be correct to me. I'd appreciate someone having a look at there's and letting me know how there's is set up. Thanks in advance, John P View posts on The Mail Archive http://www.mail-archive.com/[email protected]/ Modify <https://www.listbox.com/member/?&; e> Your Subscription <http://www.listbox.com> ------------------------------------------- View posts on The Mail Archive http://www.mail-archive.com/[email protected]/ [http://www.mail-archive.com/[email protected]/] Modify Your Subscription: https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8 Powered by Listbox: http://www.listbox.com
