Hi Tim, Thanks again. I'll have to give some thought to how that works with so few wires, fascinating. Like you I searched on the component that turned out to be diode. The heat sink block and whatever it contains is unlikely to be a Morgan special I would have thought but I can find nothing like it on a Google image search.
Thanks again, I'll work on this one. Cheers, Lawrence -----Original Message----- From: Tim [mailto:[email protected]] Sent: Saturday, April 28, 2012 3:55 PM To: mogtalk2 Subject: RE: [mogtalk2] RE:side lights Lawrence I found out by simply disconnecting it using the multiplug to the left. As to the actual electrical how, I'm afraid I don't. The component you can see is a 'Rectifier Diode' reference BYV79E-100 produced by Phillips according to an internet search. The pilot light in the headlamp comes back to a set of bullet connectors, which on the drivers side are behind the expansion tank, you should find one with a light gauge red wire un connected. I think the wing top lights connect in the wheel arch. Tim Crump ------------------------------------------- View posts on The Mail Archive http://www.mail-archive.com/[email protected]/ [http://www.mail-archive.com/[email protected]/] Modify Your Subscription: https://www.listbox.com/member/?member_id=22459785&id_secret=22459785-4a39ddf8 Powered by Listbox: http://www.listbox.com
