Hi Harvey, My extendable trailer tongue doubles as both the trailering tongue, and the extenable. If you did not want to have a similar configuration, you could have a welder rig up another piece of square tube, plus a couple of brackets to hold it. My rig uses a steel pin, plus a lock pin to hold the tongue in place.
Contact me off line if none of the above makes sense, or if you're swinging through Portland, we could perhaps set a time for you to look at my trailer. Regards, Steve ----- Original Message ----- From: "Harvey Hochstetter" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, April 01, 2002 6:48 AM Subject: M_Boats: Trailer tongue extensions > Happy First Day of April, > > Just wondering if anyone out there is using a trailer tongue extension > that is removable, as in carried somewhere other than sliding out at the > point of the existing hitch, to facilitate launch on shallower ramps > than usual. > > I'm not a welder but would like to have an extension and looking for > options, (other than using a chain, which doesn't give much control and > puts a pretty hefty strain on the landing gear and wheel.) > > Thanks for any and all ideas. > > Harvey & Deena H > M-15 #348 "Pelican" > Walla Walla, WA > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
