Doug a simple preventative solution, I like it. >>> [EMAIL PROTECTED] 04/14/02 08:53AM >>> Cherri,
I had a spare pin. If I can find it you can have it. I am convinced the pin virbrates out while trailering. I trailer about 3 - 4k miles every year. The hole for the pin on my boat is probably larger than normal due to wear. I keep the pin in useing a piece of sail repair tape on both sides. Thanks Doug --- Mark Pavuk <[EMAIL PROTECTED]> wrote: > Dale, > I am wondering if there is any problem with just > using a bolt, washers, > and a nut that locks in ( I think I am using the > right terms - my mechanical > knowledge isn't much). My friend who is working on > the boat for me wants to > do a quick fix for the season and then really work > on the boat next winter, > so he wondered why one would need to use the epoxy. > Wouldn't water get in > there anyway? I found a bolt at West Marine for > $5.00 that is what they call > marine grade stainless steel. It fit perfectly > (3/8") and I was going to cut > off the head and the threads to make it a pin but am > now wondering if that > is necessary. > Cherri > ---------- > >From: "Honshells" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Subject: M_Boats: m-15 pivot pin > >Date: Sat, Apr 13, 2002, 2:06 PM > > > > > > >Dale, I'd love to see that pic on the MSOG website. > Thanks, Craig > > > >p.s. Did you bevel the leading edge of your new > steel board/do any > >"airfoil" shaping of any kind? > > > >----- Original Message ----- > >From: "Dale Williams" <[EMAIL PROTECTED]> > >To: <[EMAIL PROTECTED]> > >Sent: Friday, April 12, 2002 11:39 PM > >Subject: M_Boats: m-15 pivot pin > > > > > >Cherri: > > > >I had a centerboard made from steel and will want > to drop it out for > >inspection from time to time. Since I don't want > to monkey around with > >epoxy > >each time, I cut a pin to the width of the keel and > had the ends tapped. > >Allen bolts inserted through caps screw into each > end of the pin and hold in > >place. John, who made my board and the pin set-up > said that he would be > >glad > >to make pins for anyone who was interested for ( I > would have to check with > >him in case I am remembering wrong) $20, shipping > included. If you are > >interested I can take a picture of my keel with the > pin in it and post it on > >the web for you. > > > >Dale Williams > >Staples, MN > >M-15 #185 "Sophie Mae" > > > > > >_______________________________________________ > >http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > > > > >_______________________________________________ > >http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats __________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/ _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
