I have modified a pottie per this list's suggestion using hot water. I heated about 2 gallons to 165 deg. Poured it into the pottie and pushed it into a tapered wood form I made. Not real easy but it worked. I weighted it down over night for the water to cool. Then transferred it to the boat. Fit nicely. Ken Abrahams, M15, Petite Fleur
----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, June 29, 2002 5:30 PM Subject: Re: M_Boats: Portable toilet for M15 > > In a message dated 6/29/02 2:04:51 PM, [EMAIL PROTECTED] writes: > > << What portable toilet fits properly in the M15? > > I was told a Thetford #35 would, I bought a #135, but it doesn't. > > Thanks, > > Brian >> > > Brian, > I am guessing that you have an earlier model M15. The 135 fits my 1991 > perfectly, but others on this list have indicated that it is slightly too > big/tight on earlier models (I am not sure exactly when the liner pan was > changed). Unfortunately, the head supplied as OEM on earlier boats is no > longer available. The good news is that a few people with earlier boats have > taken a hair dryer/heat gun to the Thetford 135 and "changed the part number > a little" to make it fit (heated the plastic carefully, and then immediately > placed in the pan to conform while the plastic was hot and pliable). Perhaps > someone who has actually done this modification will chime in. > > Scott Grometer > M15 #478 "bebe" > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
