Hello Randy, We use the same pole on our M17- fully extended- to sail
downwind wing and wing and it works well. Our's has the spike on the
outboard end and sometimes it pops out of the jib cringle while setting
it up unless your mate controls the jib sheet while inserting the spike-
however with the pole extended one can stand in the companionway and
insert the spike-not always on the first try!- without actually getting
a hold on the jib itself and it's really quick to remove. Never had one
with a hook on both ends. I installed a "C" shaped plastic 1 inch
snap-in tiller clip [WM#545343] forward and the mast ring aft to the
inside of the cabin top over on the portside. With one hand I can
unclip the hook and pull the pole out, it is easy and quick to stow and
is not in the way. Already had a mast ring on the mast so the one that
came with the pole was an extra. I mounted the clips inside to the
"beams" across the inside of the cabin top- don't know if M15's have
these- with a spot of epoxy and S.S. screws so that no holes went thru
avoiding potential leaks. We have a Raymarine 45 VHF that works great.
Best Wishes,
Ron and Cathryn Goodspeed
M17 "hula pie" #025
_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats