I've used silicon for caulking various ports and hatches. I've never used it, but isn't there a 3M 5xxx goop that is removable (as opposed to 5200, which isn't, very)? The manufacturer of the bronze ports that I fitted to Dolphin (New Found Metals) recommended 3M strip caulk, which is (surprise!) strips of caulking intended for fitting auto windshields -- it seemed to work.
For that port, though, I think I'd use silicon. Giles Morris -----Original Message----- From: Honshells [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 27, 2003 11:03 PM To: For and about Montgomery Sailboats Subject: M_Boats: Inspection Port, Oven Cleaner I just made the cut. I now have a hole in the cockpit face of my transom, awaiting a new 8" Beckson inspection port. Should I use silicon or caulk to mount this type of access opening? Early posts regarding how to deal with deck stains mentioned oven-cleaner: How long should one wait after applying the oven-cleaner before removing it? If left too long, will it harm the gel-coat? _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
