Oh, the old nylon bushing routine.  Sounds like a quick fix for an unplanned feature 
to me.

But I like the beer can idea.  In keeping with the jmbn tradition, I'll use my 
forehead to mash the can down to a more manageable size. t

Tom Smith & Jane Van Winkle
Sandpoint, Idaho
M15-345, Chukar





-----Original Message-----
From: Jerry Montgomery [mailto:[EMAIL PROTECTED]
Sent: Monday, August 18, 2003 4:26 PM
To: For and about Montgomery Sailboats
Subject: Re: M_Boats: Some M17 Questions 


Tom- we used to put a little nylon bushing, made by Shaffer, in the top of
the trunk tang, and the line was a snug fit.  This eliminated anmy water
coming up.  The hole is well above the WL, but when  going thru a chop the
water pressure builds up and spurts.  The 15's did the same thing; that's
why we put the little teak baffle over the opening.  If your boat is a 75,
the bushing probably half-lifed to oblivion.  23 years sounds like a good
half-life to me.

In your case, the easiest fix would be to wad up a beer can around the
pennant and hammer it down in the hole, then put some duct tape over it.

Jerry
----- Original Message -----
From: "Smith, Tom" <[EMAIL PROTECTED]>
To: "For and about Montgomery Sailboats"
<[EMAIL PROTECTED]>
Sent: Monday, August 18, 2003 1:53 PM
Subject: M_Boats: Some M17 Questions


>
> Good morning fellow Montgomery owners.  I recently purchased an M17 and
have several questions, but none so pressing at this; when sailing the boat
yesterday, I discovered that what the former owner said was true, namely
that this particular M17 takes water in through the top of the CB trunk,
where the CB pendent drops through.  Even in what I consider pretty tame
conditions (8-10 knots of wind and mild chop), a fair amount of water spouts
up through the hole.
>
> When viewed from above, it certainly appeared if if the trunk was full to
the top with water, which seemed odd to me, but maybe normal.  I say that
because the M15 cockpit actually drains through the trunk.
>
> The boat is a '75, and the cb works freely and was deployed yesterday.
Simply stuffing a rag into the hole solves the problem, but I wondered if
anyone else had experienced this phenomenon.  Thanks.   t
>
>
>
>
> Tom Smith & Jane Van Winkle
> Sandpoint, Idaho
> M15-345, Chukar
>
>
>
>
>
>
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>



_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats




This message was scanned for viruses.




_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to