Pretty clever, Tom. Could you then raise the tongue after you got it in? On Mon, 15 Dec 2003 11:40:48 -0800 "Smith, Tom" <[EMAIL PROTECTED]> writes: > I solved this very problem Larry. I think the building I now refer > to as the boat shed has a standard opening. To get the M17 in I > simply lowered the tongue of the trailer to the ground and slid the > whole works backwards into the building. Admitedly it was > close--the pulpit cleared by a couple of inches. I was prepared to > let air out of the tires, but that tactic didn't turn out to be > necessary... t > > Tom Smith & Jane Van Winkle > Sandpoint, Idaho > M15-345, Chukar > M17-064, Unnamed > > > > > > -----Original Message----- > From: Larry Yake [mailto:[EMAIL PROTECTED] > Sent: Saturday, December 13, 2003 5:03 PM > To: [EMAIL PROTECTED] > Subject: Re: M_Boats: M17 line drawings > > > Gary, > I don't know if all M17's are the same, but my '76 has a 21'4" > mast, > 21'10" with fittings and masthead light. If your garage door is a > standard 7', it won't fit in unless you remove the bow pulpit and > tabernacle. > Larry > > On Sat, 13 Dec 2003 13:41:51 -0800 Gary M. Hyde <[EMAIL PROTECTED]> > writes: > > Wayne: > > I'm interested in those M17 line drawings. I need to know how high > > > the > > boat is on the trailer to know if it will fit through my garage > door > > > > and how long the mast is. > > Thanks. > > --Gary Hyde > > M15 #235 'Vanilla' > > N24 'Sailabration' > > > > On Monday, April 14, 2003, at 06:10 PM, wayne yeargain wrote: > > > > > Hi Jerry: > > > Sorry your e-mail bounced, don't know why it did that - I am at > > > the > > > same address, must have been a gremlin in the wire. Any way > > thanks > > > for the M17 line drawings, I got them today, & am going to start > > > some > > > drawings right away. > > > I'll send you and any one who is intrested, some copies when I'm > > > done. > > > Had my M17 out Sat. about 10knt wind and it just romped along > like > > the > > > throughbred it is......... life is sweet. > > > Happy sails > > > Wayne > > > > > > _______________________________________________ > > > > > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > > > > > > _______________________________________________ > > > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > > > > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > > This message was scanned for viruses!! > > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > >
_______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
