A far braver man than I captain. Have you done any sailing on the SF bay with the big boys ? That is my goal after adequate training. ----LH.
-----Original Message----- From: Brian Ripley [mailto:[EMAIL PROTECTED] Sent: Thursday, July 22, 2004 8:43 AM To: For and about Montgomery Sailboats Subject: RE: M_Boats: M-15 Boat Review Larry, The Thetford PP 135/235 is a perfect fit in the M15. I believe there is a slight gap between the pottie and the plywood cover when everything is in place. I see there is even a marine model 735 that has hold down clamps; of course that isn't necessary in the M15 since, as hard as I've tried, I haven't been able to turtle it. I did manage to put the mast down on the water once; I was so impressed with how well it came back up that I sheeted in and layed it down again; the head was never an issue during all this. Brian Ripley '88 M15 Roseville, CA --- "Hughston, Larry" <[EMAIL PROTECTED]> wrote: > Brian, > > I want to get the Thetford 135 for my M-15 but does this model allow > you put the plywood cover and cushion in place and level with the > starboard and port berths? --Larry, hull # 189, 1981 model > > -----Original Message----- > From: Brian Ripley [mailto:[EMAIL PROTECTED] > Sent: Thursday, July 22, 2004 2:46 AM > To: For and about Montgomery Sailboats > Subject: Re: M_Boats: M-15 Boat Review > > > My '88 M15 still has its original Thetford Porta Pottie 235. The 235 > has the same dimensions as the 135 with the addition of a locking lid > and a level indicator on the waste tank. The level indicator is > pretty handy for knowing when to empty but the locking lid probably > doesn't add much since the head is fit so snugly in its place. > > Brian Ripley > Roseville, CA > > --- Jerry Montgomery <[EMAIL PROTECTED]> wrote: > > Originally tooled for the Porta Potti 35, which became obsolete a > > year > > or two later, replaced by the PP 135. At that time I re-tooled the > > floorpan to fit the 135. Don't know if they still make the 135 or > > not. > > > > You can fit the 135 into the early pans by heating the head and > > forcing it in; I used a hair dryer but others claim good results by > > filling it with hot water. > > > > Jerry > > > > ----- Original Message ----- > > From: "Hughston, Larry" <[EMAIL PROTECTED]> > > To: "'For and about Montgomery Sailboats'" > > <[EMAIL PROTECTED]> > > Sent: Wednesday, July 21, 2004 8:15 AM > > Subject: RE: M_Boats: M-15 Boat Review > > > > > > > Jerry, as you know by now I am the new owner of hull#189 M-15. > > > Can > > > you tell me which portapotty fits in that space? It seems VERY > > > short if I > > want > > > to place the plywood and cushion back over the portapotty. Thanks for > > > making a very sturdy little boat. I am still "dry > > > sailing"....it's > > > great! ----Larry H. Sacramento > > > > > > __________________________________ > Do you Yahoo!? > Vote for the stars of Yahoo!'s next ad campaign! > http://advision.webevents.yahoo.com/yahoo/votelifeengine/ > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > __________________________________ Do you Yahoo!? Vote for the stars of Yahoo!'s next ad campaign! http://advision.webevents.yahoo.com/yahoo/votelifeengine/ _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
