Howard,

If you choose to use a two part polyurethane paint, check with the
manufacturer about its toxicity. The use of some paints require that you be
totally covered and use an outside air source for breathing, due to
ingredients like isocyanates. There are also basecoat-clear coat types.
Don't know what their toxicity is.

Clarence
----- Original Message -----
From: "Howard Audsley" <[EMAIL PROTECTED]>
To: "For and about Montgomery Sailboats"
<[email protected]>
Sent: Wednesday, April 20, 2005 7:04 AM
Subject: Re: M_Boats: Gel Coat Matching


> So if I want to spiff up my 1978 boat, I should prep it for painting, then
> take it to an auto body shop and have them shoot on a couple coats of
white
> and some clear cote? And maybe not white. Heck....going the automotive
route
> opens up all kinds of color options. Maybe I could get a deal on Mary-Kay
> Pink in a metal flake? Wouldn't be too many of those out there!
>
> Seriously, if the automotive paint is an option, it changes the equation a
> great deal. No reason at all to have a ragged looking boat.
>
> On my stitch and glue dinghy, I have been planning to use a water based 2
> part LPU paint from System 3. Perhaps I should give the automotive paint a
> try. One of our local auto parts stores has an automotive paint section.
> Hard to imagine it could be that easy.
>
> On 4/18/05 11:42 PM, "jerry" <[EMAIL PROTECTED]> wrote:
>
>
> >
> > I better way on an older boat is to use a two-part polyurethane.  Rather
> > than LP (linear polyurethane), an automotive type is better because you
can
> > sand out any runs, and it stands up to UV better.  You can spray it over
> > gel-coat (prep just like you would when using gel-coat, then wetsand out
the
> > edges and buff.  It'll be the shiniest spot on the boat, esp[ecially ten
> > years later.  The best auto-type polyurethane is Deltron, made by PPG.
You
> > can't get it many places now in CA because of harrassment from the air
> > quality people, but it IS still legal for boats and airplanes.
> >
> > Jerry
> > jerrymontgomery.org
>
>
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>



_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to