Everyone, I am trying to find the best way to mount a transom ladder on my M-15. It will go on the the starboard side of course but how do get to the inside to create proper support with plate aluminum or high quality plywood that is covered with epoxy and glasscloth? Is this a factory install only? Thanks all. ----Larry
-----Original Message----- From: Brian Gilbert [mailto:[EMAIL PROTECTED] Sent: Sunday, July 10, 2005 5:28 PM To: [email protected] Subject: M_Boats: Re: montgomery_boats Digest, Vol 29, Issue 6 Tom: My bilge pump is located in the side of the footwell in the cockpit, but on the aft side near the motor cutout. I don't think it was a factory installation, but it could have been... hard to tell. At any rate I need to drill out the pop rivets, add new compound, and reseal with bolts. Thanks BG -- Brian Gilbert Marine Media M17 "Tiny Dancer" (ex "Stargazer") (423)876-9990 3404 Hartford Drive Chattanooga, TN 37415 www.sailingsmall.com on 7/10/05 5:49 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote: > Brian, our M17 came with a manual bilge pump as well, and I believe it > is a Whale. I called about rebuilding mine and was given some > information which I will have to re-locate. Is your pump mounted in > the cockpit at the bridge deck? t > > > Tom Smith & Jane VanWinkle > M15/345--Chukar > M17/064--Unnamed _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
