I installed a Simrad 10 tiller pilot on Tullamore this spring.  The
height difference between the seat and the tiller on a 17 is pretty
substantial. Around 13.5" as I recall. More than you can make up with a
pedestal bracket and tiller drop bracket. Like Rachael, I ended up
installing the coaming mount on the seat back. It's a rather expensive
part, around $70, but it works well, makes a clean functional mount, and
also solves the distance problem from the coaming to the tiller. The
extension rod that screws into the coaming mount can be removed when you
don't expect to use the tiller pilot for a while, leaving only the
mounting plate and power plug in sight.  I installed mine an inch or two
closer to the transom than is recommended in the instructions to allow
the cover on the small starboard hatch to be opened with the pilot in
place. It doesn't seem to have affected the performance.

Larry

On Tue, 6 Sep 2005 14:14:11 -0400 "Morris, Giles"
<[EMAIL PROTECTED]> writes:
> > I am curious about how others have mounted their auto pilots on 
> M17's.
> I
> > have an older Navico Tiller-pilot and at first glance the coaming 
> is
> too
> far
> > away, and the cockpit seat in too far below the tiller for any
> convenient
> > mounting arrangement?  How have others accomplished this? 
> 
> I had a somewhat similar problem, in that the tiller was too far 
> above
> the coaming. It all worked out on Dolphin by raising the coaming 
> mount
> with a pedestal bracket rather like this
>
http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/100
> 01/125525/10001/630/628/3 and by attaching a bracket below the 
> tiller,
> somewhat like this
>
http://www.westmarine.com/webapp/wcs/stores/servlet/product/10001/-1/100
> 01/7598/10001/630/628/3 . It works well.
> 
> If it's just a matter of distance, you could use an extension rod.
> 
> I like mine enough that after it went nuts on my last trip (it
> misunderstood the Tack command as "Hard a starboard, and keep it 
> there
> forever") I decided to buy another. Luckily, it restored itself to
> useful life after being unpowered for a while.
> 
> Giles Morris
> Vancouver 25 Dolphin
> 
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
> 
> 

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to