Howard is right, when I re-worked my trailer I did add some more rollers. There are now four rather than one, and the two that are in way of the protruding c/b are about 3/4" lower in an attempt to reduce the load on the c/b. The axle on the original single roller had bent.
So far so good. I also added some sill foam padding under the bunk carpeting when I replaced my bunks to try to reduce hard spots where the lapstrakes contact the bunks. There are a couple of spots where gelcoat has worn at the corner of the strakes. Tod Mills M17 #408 BuscaBrisas _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
