I had Elliott-Pattison make a storm jib for me when I bought my boat. Very satisfied with what they delivered.
Joe Moore M15 #641 Midnight Passage On 7/9/07 8:18 PM, "Gary M Hyde" <[EMAIL PROTECTED]> wrote: > I'm very satisfied with the performance of the Elliott-Pattison sails > that came with my 2005 M17. The roller-reefing genoa is cut so that I > don't have to move the jib sheet turning block when I reef. > Having trouble keeping the main slugs attached is the only down side. > > --Gary Hyde > 2005 M17 sailboat #637 'Hydeaway 2' > We can't change the wind, but we can trim our sails. > > > On Jul 9, 2007, at 3:32 PM, gilbert landin wrote: > >> TC boats did mine in Tan Bark, and I am quite pleased...For best >> results >> send in your old ones. >> >> >> >> Gilbert >> >> Sagitta M17 1974 >> >> >> -----Original Message----- >> From: montgomery_boats-bounces >> [EMAIL PROTECTED] >> [mailto:montgomery_boats-bounces >> [EMAIL PROTECTED] >> om] On Behalf Of brian gilbert >> Sent: Monday, July 09, 2007 7:41 AM >> To: [email protected] >> Subject: M_Boats: Favorite Monty sailmaker? >> >> Hi All: >> >> Here's a request for opinions for those of you who have replaced >> sails... >> who is your favorite sailmaker who does mail-orders? (no local >> sailmakers in >> Chattanooga, TN) >> >> I need to replace at least my main and possibly a jib as well. I've >> ordered >> from SailsEast before... the price was really good, and the cut and >> shape >> were fine, but the finish and handwork was pretty minimal. I'd >> prefer to >> spend a little more and get a well-built, longer lasting cruising >> sail. I'm >> wondering who else I should seek quotes from. >> >> Thanks very much >> BG >> >> -- >> Brian Gilbert >> Author, Fix It And Sail, The Complete Trailer-Sailor >> Marine Media >> 3404 Hartford Dr >> Chattanooga, TN 37415 >> www.sailingsmall.com >> >> >> From: [EMAIL PROTECTED] >> Reply-To: [email protected] >> Date: Sun, 08 Jul 2007 21:44:18 -0600 >> To: [email protected] >> Subject: montgomery_boats Digest, Vol 53, Issue 6 >> >> Hi Tom, >> >> I've raised my M17 off the trailer bunks using a floor jack and a >> cushioning 2" x 6" piece of lumber under the keel. Worked fine. >> >> Bones >> >> >> _______________________________________________ >> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats >> >> >> _______________________________________________ >> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > > > _______________________________________________ > http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats > _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
