IF YOU REPLACE THE PIN, I'D SUGGEST YOU PUT IN SS SLEEVE FOR THE PIN -----Original Message----- From: "Doug Kelch" <[EMAIL PROTECTED]> To: "For and about Montgomery Sailboats" <[EMAIL PROTECTED]> Sent: 12/12/07 8:41 AM Subject: Re: M_Boats: Keel pivot pin
M15 #310 - previous owner had removed the pin from the port side. The pin in my boat is not tapered but is not original equiptment. When inserting the pin there was no indication that the hole was tapered. Thanks Doug Kelch Bill Lamica <[EMAIL PROTECTED]> wrote: I remember someone mentioning the keel pivot pin, or stop pin on some of the M-Boats has to be removed in one direction because the pin and hole are tapered. If someone knows the model and the direction of push, I sure could use the info. Bill _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats --------------------------------- Never miss a thing. Make Yahoo your homepage. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
