Kendall,

On our M15 (factory original) the group 24 battery box and battery were mounted 
under the vberth plywood cover, with the Styrofoam fitted around the box as 
best as possible; making our 15 to have less floatation and 30 lbs more weight 
than yours. My guess is the amount of Styrofoam added for positive floatation 
is approximate. It makes sense to me that this area would be a great place to 
store your anchor, as you want to get the weight as forward as possible.

The previous owner of our M17 filled every available storage area with a 
similar Styrofoam as the 15. So much Styrofoam that when removed it filled the 
interior of our 3/4 ton van. Even now, 3 years later, I still find bits and 
pieces of Styrofoam here-and-there. I'm not sure you could put enough Styrofoam 
into a 17 to make it positive floatation, but it sure made for clean storage 
compartments once it was all removed!

Randy Graves
M17 #410

________________________________________
From: [EMAIL PROTECTED] [EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] [EMAIL 
PROTECTED]
Sent: Friday, February 22, 2008 2:44 PM
To: [email protected]
Subject: M_Boats: Moving/Removing of some Styrofoam

Kendall replying to Gary and Doug,

Thanks for your input.

About the foam.  I certainly don't wish to lower the value of the Monty.  I 
wasn't looking to expand the area, only replace the area Jerry had already 
placed Styrofoam.  If I filled the cavity in the bow (filled in the space where 
there are gaps between the chunks of Styrofoam) I think I would gain enough 
room to use the area normally screwed closed, forward of the potty area, as 
storage for my anchor and rode.

So my new question is...If I pass on the spray foam idea, can I remove 1.4 
cubic feet of Styrofoam from the forward compartment and be okay?  Can I 
relocate it to another location, maybe hot glue it to the bottom of my cabin 
floor above the bilge?  That way it would still be there...centered, out of the 
way, just aft of normal.

What does everybody think?

Kendall
M-15 #164


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to