Thanks Gordon,

Spirit is less then a year old and is equipped with the stepped- 
diameter rudder rod.  Still, the rod may be a contributer to the  
harmonics, so next time I'll check this more closely .   Hey, there's  
nothing more fun then hanging over the stern and fidgeting with  
rudder parts while sailing down a narrow, crowded channel right?

Jim
M17 "Spirit"

On Sep 27, 2008, at 7:12 AM, Gordon Gilbert wrote:

> Hi, Jim:
> I just experienced a similar thing on a sail yesterday. In my case
> (I'm not sure if your setup is the same as my 1983 model), the steel
> rod that the rudder hinges on had ridden up when I raised the rudder
> previously. Then when I lowered it, the rod did not go down
> completely with the rudder, leaving the rod short and out of the
> lowest gudgeon (right word?). This has happened before, and when I
> pushed down the rod completely (so the cotter ring can't go any
> lower) the humming went away. I determined yesterday that I just need
> to ensure that the rod goes all the way down with the rudder every
> time I lower it for a sail.
>
> Have a great weekend!
>
> Gordon
> M-17 "Sapphire"
> Milwaukee
>
>
> On Sep 27, 2008, at 2:20 AM, James Poulakis wrote:
>
>> Sailing even with a moderate breeze makes Spirit's rudder hum loud
>> enough to drown out the Pillar Point fog horn.  The rudder is new and
>> doesn't seem to be warped.  Is there a trick to stop this or is it
>> just a Monty thing?
>>
>> Jim Poulakis
>> "Spirit" (M17)
>>
>> _______________________________________________
>> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
>
>
> _______________________________________________
> http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats


_______________________________________________
http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats

Reply via email to