Andrei, If I were going to store my boat in the water and wanted good protection from blisters I would apply 5 to 7 coats of Interlux 2000/2001 barrier coat with the applications EXACTLY as directions (notably -tack time, and mixing components). I have heard anecdotally, that cool fresh water is less prone to causing blisters - but do you want to be a part of the ongoing test? Probably not. Barrier coat and dry bilges are the best defense against blistering in your case. FWIW -I base my opinion on 30 years of maintaining late 60's thru late 90's built polyester resin sailboats in warm freshwater as a former marina operator. If you put the boat in the water, use barrier coat for your best protection for what you have, anti-fouling is optional. IMHO worth all of what was charged. Just another to add to your confusion - sorry. Take Care, Have Fun, Go Sailing! GO M-17 # 316a LB/GF! In a message dated 10/17/2008 7:13:21 A.M. US Mountain Standard Time, [EMAIL PROTECTED] writes:
It seems like the opinions on this topic are as varied as the people who sail M-17's: I got one person who says no way without barrier coat, one who says use barrier coat but less of it, one who says it's OK to go without it, and one who says keep the boat on the trailer :-) Could someone else weigh in on this issue to at least hopefully sway the balance one way or another? Thanks, Andrei. _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats **************New MapQuest Local shows what's happening at your destination. Dining, Movies, Events, News & more. Try it out (http://local.mapquest.com/?ncid=emlcntnew00000002) _______________________________________________ http://mailman.xmission.com/cgi-bin/mailman/listinfo/montgomery_boats
