Hello, I am going thru the steps described in the baseline system instructions. I have no problems until the very end when I try to filter out the test data from the binarised model.
Here is the step in the instructions where the error appears: *The model that we've trained can then be filtered for this test set, meaning that we only retain the entries needed translate the test set. This will make the translation a lot faster.* *cd ~/working* *~/mosesdecoder/scripts/training/filter-model-given-input.pl <http://filter-model-given-input.pl> filtered-newstest2011 mert-work/moses.ini ~/corpus/newstest2011.true.fr <http://newstest2011.true.fr> -Binarizer ~/mosesdecoder/bin/processPhraseTableMin* Here is the error message: *Can't open '< /home/steve/working/binarised-model/reordering-table' at /home/steve/mosesdecoder/scripts/training/filter-model-given-input.pl <http://filter-model-given-input.pl> line 439.* Keep in mind the following: - I compiled moses with the following parameters. It is the same compilation. I did not recompile moses at any point during the process. ./bjam -a --with-boost=/home/steve/mosesdecoder/boost_1_55_0 --with-cmph=$HOME/mosesdecoder/cmph/cmph-2.0 NOTE: I did try recompiling with the absolute path for cmph. Same error. - I checked all paths first to make sure they exist. - I am able to translate segments using the binarised model with no problem - I provided my moses.ini file below. Questions: - Can I recompile moses after training and/or tuning, and expect that it should work for testing? I ask because I want to know if the solution is to modify the compile options, do I have to start from scratch again? (Can you filter a binarised model using moses with different compile options that were used to train the model?) Thanks, Steve Moses.ini file # MERT optimized configuration # decoder /home/steve/mosesdecoder/bin/moses # BLEU 0.18611 on dev /home/steve/corpus/news-test2008.true.fr # We were before running iteration 5 # finished Thu Sep 15 01:53:22 PDT 2016 ### MOSES CONFIG FILE ### ######################### # input factors [input-factors] 0 # mapping steps [mapping] 0 T 0 [distortion-limit] 6 # feature functions [feature] UnknownWordPenalty WordPenalty PhrasePenalty PhraseDictionaryCompact name=TranslationModel0 num-features=4 path=/home/steve/working/binarised-model/phrase-table.minphr input-factor=0 output-factor=0 LexicalReordering name=LexicalReordering0 num-features=6 type=wbe-msd-bidirectional-fe-allff input-factor=0 output-factor=0 path=/home/steve/working/binarised-model/reordering-table Distortion KENLM name=LM0 factor=0 path=/home/steve/lm/news-commentary-v8.fr-en.blm.en order=3 # dense weights for feature functions [threads] 4 [weight] LexicalReordering0= 0.0760973 0.0426988 0.0872591 0.0872621 0.0141898 0.0348721 Distortion0= 0.0721205 LM0= 0.0908638 WordPenalty0= -0.153776 PhrasePenalty0= 0.0874059 TranslationModel0= 0.0162038 0.0871216 0.0687163 0.0814132 UnknownWordPenalty0= 1
_______________________________________________ Moses-support mailing list Moses-support@mit.edu http://mailman.mit.edu/mailman/listinfo/moses-support