Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. netcam_read_first_header: Found Conn: close header
('connection: close') (T. Ermlich)
2. Re: netcam_read_first_header: Found Conn: close header
('connection: close') (tosiara)
3. Re: netcam_read_first_header: Found Conn: close header
('connection: close') (T. Ermlich)
----------------------------------------------------------------------
Message: 1
Date: Tue, 17 Feb 2015 12:51:33 +0100
From: "T. Ermlich" <[email protected]>
Subject: [Motion-user] netcam_read_first_header: Found Conn: close
header ('connection: close')
To: [email protected]
Message-ID:
<trinity-73fcfb5e-3416-49f2-8baf-dd7638298823-1424173892993@3capp-gmx-bs49>
Content-Type: text/plain; charset=UTF-8
Hi :)
today I compiled motion Version Unofficial-Git-a5b5f13, and tried to set it up
to work with two webcams.
First one is an Axis 2110, second one is an Digitus DN-16032.
The Axis 2110 runs fine, but the Digitus one gives problems ...
Here's a snip from the logfile:
[0] [NTC] [ALL] [Feb 17 12:23:16] motion_startup: Using log type (ALL) log
level (NTC)
[0] [NTC] [ALL] [Feb 17 12:23:16] become_daemon: Motion going to daemon mode
[0] [NTC] [ALL] [Feb 17 12:23:16] become_daemon: Created process id file
/var/run/motion.pid. Process ID is 15527
[0] [NTC] [ALL] [Feb 17 12:23:16] motion_startup: Motion running as daemon
process
[0] [NTC] [ENC] [Feb 17 12:23:16] ffmpeg_init: ffmpeg LIBAVCODEC_BUILD 3482368
LIBAVFORMAT_BUILD 3478785
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 1 is from
/etc/motion/thread1.conf
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 1 is device:
http://IP_ADDR_1/axis-cgi/mjpg/video.cgi input -1
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Stream port 8081
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 2 is from
/etc/motion/thread2.conf
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 2 is device:
http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD input -1
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Stream port 8082
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Waiting for threads to finish, pid:
15527
[2] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Thread 2 started , motion
detection Enabled
[2] [ALR] [NET] [Feb 17 12:23:16] netcam_start: Network Camera thread
starting... for url
(http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD)
[1] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Thread 1 started , motion
detection Enabled
[1] [ALR] [NET] [Feb 17 12:23:16] netcam_start: Network Camera thread
starting... for url (http://IP_ADDR_1/axis-cgi/mjpg/video.cgi)
[1] [NTC] [NET] [Feb 17 12:23:16] netcam_setup_html: connected, going on to
read image.
[1] [NTC] [ALL] [Feb 17 12:23:16] image_ring_resize: Resizing pre_capture
buffer to 1 items
[1] [ALR] [NET] [Feb 17 12:23:16] netcam_handler_loop: Camera handler thread
[3] started
[1] [NTC] [STR] [Feb 17 12:23:16] http_bindsock: motion-stream testing : IPV4
addr: 0.0.0.0 port: 8081
[1] [NTC] [STR] [Feb 17 12:23:16] http_bindsock: motion-stream Bound : IPV4
addr: 0.0.0.0 port: 8081
[1] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Started motion-stream server in
port 8081 auth Disabled
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn: close
header ('connection: close')
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
header - re-trying
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn: close
header ('Connection: close')
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
header - re-trying
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn: close
header ('Connection: close')
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
header - re-trying
[2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Found Conn: close
header ('Connection: close')
[2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Error reading first
header - re-trying
[2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Found Conn: close
header ('Connection: close')
[2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Error reading first
header - re-trying
[2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Failed to read first
camera header - giving up for now
[2] [WRN] [ALL] [Feb 17 12:23:17] motion_init: Could not fetch initial image
from camera Motion continues using width and height from config file(s)
[2] [NTC] [ALL] [Feb 17 12:23:17] image_ring_resize: Resizing pre_capture
buffer to 1 items
[2] [NTC] [STR] [Feb 17 12:23:17] http_bindsock: motion-stream testing : IPV4
addr: 0.0.0.0 port: 8082
[2] [NTC] [STR] [Feb 17 12:23:17] http_bindsock: motion-stream Bound : IPV4
addr: 0.0.0.0 port: 8082
[2] [NTC] [ALL] [Feb 17 12:23:17] motion_init: Started motion-stream server in
port 8082 auth Disabled
[2] [WRN] [ALL] [Feb 17 12:23:20] motion_loop: Retrying until successful
connection with camera
...
and so on.
I can, for example, connect to
http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD with
firefox, and get a picture.
My thread2.conf:
netcam_url http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD
netcam_keepalive on
stream_port 8082
stream_motion off
stream_localhost off
stream_limit 0
stream_auth_method 0
#
netcam_tolerant_check on
rtsp_uses_tcp on
#
output_pictures off
#
I'd just like to be able to watch the images/streams from those two cams via
one system ...
Anybody with any ideas? ;)
Thanks a lot!
cu
Torsten
------------------------------
Message: 2
Date: Tue, 17 Feb 2015 13:59:27 +0200
From: tosiara <[email protected]>
Subject: Re: [Motion-user] netcam_read_first_header: Found Conn: close
header ('connection: close')
To: Motion discussion list <[email protected]>
Message-ID:
<CACHTdwR1bobD0e5jk=+ywDg=zwd+ohyucfaldvdghrjvegz...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Are you sure the camera gives you MJPEG at that URL?
http://IP_ADDR_2/snapshot.jpg
More looks like it should give you a single JPEG, not a stream
When you open that URL in Firefox - do you see video or just one image?
On Tue, Feb 17, 2015 at 1:51 PM, T. Ermlich <[email protected]> wrote:
> Hi :)
>
> today I compiled motion Version Unofficial-Git-a5b5f13, and tried to set
> it up to work with two webcams.
> First one is an Axis 2110, second one is an Digitus DN-16032.
>
> The Axis 2110 runs fine, but the Digitus one gives problems ...
>
> Here's a snip from the logfile:
> [0] [NTC] [ALL] [Feb 17 12:23:16] motion_startup: Using log type (ALL) log
> level (NTC)
> [0] [NTC] [ALL] [Feb 17 12:23:16] become_daemon: Motion going to daemon
> mode
> [0] [NTC] [ALL] [Feb 17 12:23:16] become_daemon: Created process id file
> /var/run/motion.pid. Process ID is 15527
> [0] [NTC] [ALL] [Feb 17 12:23:16] motion_startup: Motion running as daemon
> process
> [0] [NTC] [ENC] [Feb 17 12:23:16] ffmpeg_init: ffmpeg LIBAVCODEC_BUILD
> 3482368 LIBAVFORMAT_BUILD 3478785
> [0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 1 is from
> /etc/motion/thread1.conf
> [0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 1 is device:
> http://IP_ADDR_1/axis-cgi/mjpg/video.cgi input -1
> [0] [NTC] [ALL] [Feb 17 12:23:16] main: Stream port 8081
> [0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 2 is from
> /etc/motion/thread2.conf
> [0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 2 is device:
> http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD input
> -1
> [0] [NTC] [ALL] [Feb 17 12:23:16] main: Stream port 8082
> [0] [NTC] [ALL] [Feb 17 12:23:16] main: Waiting for threads to finish,
> pid: 15527
> [2] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Thread 2 started , motion
> detection Enabled
> [2] [ALR] [NET] [Feb 17 12:23:16] netcam_start: Network Camera thread
> starting... for url (
> http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD)
> [1] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Thread 1 started , motion
> detection Enabled
> [1] [ALR] [NET] [Feb 17 12:23:16] netcam_start: Network Camera thread
> starting... for url (http://IP_ADDR_1/axis-cgi/mjpg/video.cgi)
> [1] [NTC] [NET] [Feb 17 12:23:16] netcam_setup_html: connected, going on
> to read image.
> [1] [NTC] [ALL] [Feb 17 12:23:16] image_ring_resize: Resizing pre_capture
> buffer to 1 items
> [1] [ALR] [NET] [Feb 17 12:23:16] netcam_handler_loop: Camera handler
> thread [3] started
> [1] [NTC] [STR] [Feb 17 12:23:16] http_bindsock: motion-stream testing :
> IPV4 addr: 0.0.0.0 port: 8081
> [1] [NTC] [STR] [Feb 17 12:23:16] http_bindsock: motion-stream Bound :
> IPV4 addr: 0.0.0.0 port: 8081
> [1] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Started motion-stream
> server in port 8081 auth Disabled
> [1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in
> buffer
> [1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in
> buffer
> [1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in
> buffer
> [1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in
> buffer
> [1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in
> buffer
> [2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn:
> close header ('connection: close')
> [2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
> present
> [2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
> header - re-trying
> [2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn:
> close header ('Connection: close')
> [2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
> present
> [2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
> header - re-trying
> [2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn:
> close header ('Connection: close')
> [2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
> present
> [2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
> header - re-trying
> [2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Found Conn:
> close header ('Connection: close')
> [2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Content-length
> present
> [2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Error reading first
> header - re-trying
> [2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Found Conn:
> close header ('Connection: close')
> [2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Content-length
> present
> [2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Error reading first
> header - re-trying
> [2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Failed to read
> first camera header - giving up for now
> [2] [WRN] [ALL] [Feb 17 12:23:17] motion_init: Could not fetch initial
> image from camera Motion continues using width and height from config
> file(s)
> [2] [NTC] [ALL] [Feb 17 12:23:17] image_ring_resize: Resizing pre_capture
> buffer to 1 items
> [2] [NTC] [STR] [Feb 17 12:23:17] http_bindsock: motion-stream testing :
> IPV4 addr: 0.0.0.0 port: 8082
> [2] [NTC] [STR] [Feb 17 12:23:17] http_bindsock: motion-stream Bound :
> IPV4 addr: 0.0.0.0 port: 8082
> [2] [NTC] [ALL] [Feb 17 12:23:17] motion_init: Started motion-stream
> server in port 8082 auth Disabled
> [2] [WRN] [ALL] [Feb 17 12:23:20] motion_loop: Retrying until successful
> connection with camera
> ...
> and so on.
>
> I can, for example, connect to
> http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD with
> firefox, and get a picture.
>
> My thread2.conf:
> netcam_url
> http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD
> netcam_keepalive on
> stream_port 8082
> stream_motion off
> stream_localhost off
> stream_limit 0
> stream_auth_method 0
> #
> netcam_tolerant_check on
> rtsp_uses_tcp on
> #
> output_pictures off
> #
>
> I'd just like to be able to watch the images/streams from those two cams
> via one system ...
>
> Anybody with any ideas? ;)
>
> Thanks a lot!
>
> cu
> Torsten
>
>
> ------------------------------------------------------------------------------
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration & more
> Get technology previously reserved for billion-dollar corporations, FREE
>
> http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Tue, 17 Feb 2015 13:43:26 +0100
From: "T. Ermlich" <[email protected]>
Subject: Re: [Motion-user] netcam_read_first_header: Found Conn: close
header ('connection: close')
To: [email protected]
Message-ID:
<trinity-5fd306b4-ca58-42b0-99aa-a6a74d4926a3-1424177006046@3capp-gmx-bs25>
Content-Type: text/plain; charset=UTF-8
It provides only one images, which could be refreshed ...
I thought it doesn't matter what the source is ...
motion-dist.conf says:
# URL to use if you are using a network camera, size will be autodetected (incl
http:// ftp:// mjpg:// rtsp:// mjpeg:// or file:///)
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream.
Default: Not defined
; netcam_url value
?
Gesendet:?Dienstag, 17. Februar 2015 um 12:59 Uhr
Von:?tosiara <[email protected]>
An:?"Motion discussion list" <[email protected]>
Betreff:?Re: [Motion-user] netcam_read_first_header: Found Conn: close header
('connection: close')
Are you sure the camera gives you MJPEG at that URL?
http://IP_ADDR_2/snapshot.jpgMore looks like it should give you a single JPEG,
not a streamWhen you open that URL in Firefox - do you see video or just one
image?
?
On Tue, Feb 17, 2015 at 1:51 PM, T. Ermlich
<[email protected][[email protected]]> wrote:Hi :)
today I compiled motion Version Unofficial-Git-a5b5f13, and tried to set it up
to work with two webcams.
First one is an Axis 2110, second one is an Digitus DN-16032.
The Axis 2110 runs fine, but the Digitus one gives problems ...
Here's a snip from the logfile:
[0] [NTC] [ALL] [Feb 17 12:23:16] motion_startup: Using log type (ALL) log
level (NTC)
[0] [NTC] [ALL] [Feb 17 12:23:16] become_daemon: Motion going to daemon mode
[0] [NTC] [ALL] [Feb 17 12:23:16] become_daemon: Created process id file
/var/run/motion.pid. Process ID is 15527
[0] [NTC] [ALL] [Feb 17 12:23:16] motion_startup: Motion running as daemon
process
[0] [NTC] [ENC] [Feb 17 12:23:16] ffmpeg_init: ffmpeg LIBAVCODEC_BUILD 3482368
LIBAVFORMAT_BUILD 3478785
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 1 is from
/etc/motion/thread1.conf
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 1 is device:
http://IP_ADDR_1/axis-cgi/mjpg/video.cgi[http://IP_ADDR_1/axis-cgi/mjpg/video.cgi]
input -1
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Stream port 8081
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 2 is from
/etc/motion/thread2.conf
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Thread 2 is device:
http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD[http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD]
input -1
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Stream port 8082
[0] [NTC] [ALL] [Feb 17 12:23:16] main: Waiting for threads to finish, pid:
15527
[2] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Thread 2 started , motion
detection Enabled
[2] [ALR] [NET] [Feb 17 12:23:16] netcam_start: Network Camera thread
starting... for url
(http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD[http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD])
[1] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Thread 1 started , motion
detection Enabled
[1] [ALR] [NET] [Feb 17 12:23:16] netcam_start: Network Camera thread
starting... for url
(http://IP_ADDR_1/axis-cgi/mjpg/video.cgi[http://IP_ADDR_1/axis-cgi/mjpg/video.cgi])
[1] [NTC] [NET] [Feb 17 12:23:16] netcam_setup_html: connected, going on to
read image.
[1] [NTC] [ALL] [Feb 17 12:23:16] image_ring_resize: Resizing pre_capture
buffer to 1 items
[1] [ALR] [NET] [Feb 17 12:23:16] netcam_handler_loop: Camera handler thread
[3] started
[1] [NTC] [STR] [Feb 17 12:23:16] http_bindsock: motion-stream testing : IPV4
addr: 0.0.0.0 port: 8081
[1] [NTC] [STR] [Feb 17 12:23:16] http_bindsock: motion-stream Bound : IPV4
addr: 0.0.0.0 port: 8081
[1] [NTC] [ALL] [Feb 17 12:23:16] motion_init: Started motion-stream server in
port 8081 auth Disabled
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[1] [WRN] [NET] [Feb 17 12:23:16] netcam_next: called with no data in buffer
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn: close
header ('connection: close')
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
header - re-trying
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn: close
header ('Connection: close')
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
header - re-trying
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Found Conn: close
header ('Connection: close')
[2] [NTC] [NET] [Feb 17 12:23:16] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:16] netcam_http_request: Error reading first
header - re-trying
[2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Found Conn: close
header ('Connection: close')
[2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Error reading first
header - re-trying
[2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Found Conn: close
header ('Connection: close')
[2] [NTC] [NET] [Feb 17 12:23:17] netcam_read_first_header: Content-length
present
[2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Error reading first
header - re-trying
[2] [ERR] [NET] [Feb 17 12:23:17] netcam_http_request: Failed to read first
camera header - giving up for now
[2] [WRN] [ALL] [Feb 17 12:23:17] motion_init: Could not fetch initial image
from camera Motion continues using width and height from config file(s)
[2] [NTC] [ALL] [Feb 17 12:23:17] image_ring_resize: Resizing pre_capture
buffer to 1 items
[2] [NTC] [STR] [Feb 17 12:23:17] http_bindsock: motion-stream testing : IPV4
addr: 0.0.0.0 port: 8082
[2] [NTC] [STR] [Feb 17 12:23:17] http_bindsock: motion-stream Bound : IPV4
addr: 0.0.0.0 port: 8082
[2] [NTC] [ALL] [Feb 17 12:23:17] motion_init: Started motion-stream server in
port 8082 auth Disabled
[2] [WRN] [ALL] [Feb 17 12:23:20] motion_loop: Retrying until successful
connection with camera
...
and so on.
I can, for example, connect to
http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD[http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD]
with firefox, and get a picture.
My thread2.conf:
netcam_url?
http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD[http://IP_ADDR_2/snapshot.jpg?account=USER_NAME&password=PASS_WORD]
netcam_keepalive on
stream_port 8082
stream_motion off
stream_localhost off
stream_limit 0
stream_auth_method 0
#
netcam_tolerant_check on
rtsp_uses_tcp on
#
output_pictures off
#
I'd just like to be able to watch the images/streams from those two cams via
one system ...
Anybody with any ideas? ;)
Thanks a lot!
cu
Torsten
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk[http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk]
_______________________________________________
Motion-user mailing list
[email protected][[email protected]]
https://lists.sourceforge.net/lists/listinfo/motion-user
http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server from
Actuate! Instantly Supercharge Your Business Reports and Dashboards with
Interactivity, Sharing, Native Excel Exports, App Integration & more Get
technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk_______________________________________________[http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk_______________________________________________]
Motion-user mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user[https://lists.sourceforge.net/lists/listinfo/motion-user]
http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
------------------------------
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration & more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=190641631&iu=/4140/ostg.clktrk
------------------------------
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
End of Motion-user Digest, Vol 105, Issue 7
*******************************************
