Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. How to install motion on raspberry pi 3? (Slavica Tomovic)
2. Re: How to install motion on raspberry pi 3? (Adam Ali)
3. Re: How to install motion on raspberry pi 3? (Mr Dave)
4. Re: How to install motion on raspberry pi 3? (Thomas Drebert)
----------------------------------------------------------------------
Message: 1
Date: Thu, 6 Oct 2016 00:30:54 +0200
From: Slavica Tomovic <[email protected]>
Subject: [Motion-user] How to install motion on raspberry pi 3?
To: Motion discussion list <[email protected]>
Message-ID:
<canky2stmlasthhq9hvppncn6gxnwx2f6pgwbtdmwnkcla91...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hi,
I was using motion with RPI camera on RPI 2, and I did not have any
problems. However, now I want to use RPI 3 due to performance reasons.
To install motion I used the same instructions as before, from this site:
http://www.codeproject.com/Articles/665518/Raspberry-Pi-as-low-cost-HD-surveillance-camera
The first problem I faced with was caused by:
sudo apt-get install -y libjpeg62 libjpeg62-dev libavformat53
libavformat-dev libavcodec53 libavcodec-dev libavutil51 libavutil-dev
libc6-dev zlib1g-dev libmysqlclient18 libmysqlclient-dev libpq5 libpq-dev
The error suggested me to instal libjpeg62-turbo and libjpeg62-turbo-dev
instead of the first two packages listed above.
Also, I could not install libav packages, so I just used a command:
*sudo apt-get
install libav-tools* instead.
After that I rebooted the RPI3, and motion does not work. My log file is
empty and I do not have any idea what is the error.
Can you please give me some feedback regarding this issue?
Also, I should mention that my RPI camera works fine without motion. So the
camera is not the problem.
Thank you in advance,
Slavica
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Thu, 6 Oct 2016 06:02:16 +0700
From: Adam Ali <[email protected]>
Subject: Re: [Motion-user] How to install motion on raspberry pi 3?
To: Motion discussion list <[email protected]>
Message-ID:
<cam5sjats-a3vzerjubrptxjakrzzm5ubd_x2sdgximaxxym...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
I thought raspi cam need special binary, search Motion MMAL
CMIIW
On Oct 6, 2016 5:32 AM, "Slavica Tomovic" <[email protected]> wrote:
> Hi,
>
> I was using motion with RPI camera on RPI 2, and I did not have any
> problems. However, now I want to use RPI 3 due to performance reasons.
>
> To install motion I used the same instructions as before, from this site:
> http://www.codeproject.com/Articles/665518/Raspberry-Pi-
> as-low-cost-HD-surveillance-camera
>
> The first problem I faced with was caused by:
>
> sudo apt-get install -y libjpeg62 libjpeg62-dev libavformat53
> libavformat-dev libavcodec53 libavcodec-dev libavutil51 libavutil-dev
> libc6-dev zlib1g-dev libmysqlclient18 libmysqlclient-dev libpq5 libpq-dev
>
> The error suggested me to instal libjpeg62-turbo and libjpeg62-turbo-dev
> instead of the first two packages listed above.
>
> Also, I could not install libav packages, so I just used a command: *sudo
> apt-get
> install libav-tools* instead.
>
> After that I rebooted the RPI3, and motion does not work. My log file is
> empty and I do not have any idea what is the error.
>
> Can you please give me some feedback regarding this issue?
>
> Also, I should mention that my RPI camera works fine without motion. So
> the camera is not the problem.
>
> Thank you in advance,
>
> Slavica
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Wed, 5 Oct 2016 17:18:00 -0600
From: Mr Dave <[email protected]>
Subject: Re: [Motion-user] How to install motion on raspberry pi 3?
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset="windows-1252"
The mmal camera (aka Pi camera) is now supported by the project but has
not been packaged yet. As such, you would need to build from source.
Instructions on building and configuration options can be reviewed
within the guide here.
http://htmlpreview.github.io/?https://github.com/Motion-Project/motion/blob/master/motion_guide.html#Abbreviated_Building
MrDave
On 10/5/2016 5:02 PM, Adam Ali wrote:
>
> I thought raspi cam need special binary, search Motion MMAL
> CMIIW
>
>
> On Oct 6, 2016 5:32 AM, "Slavica Tomovic" <[email protected]
> <mailto:[email protected]>> wrote:
>
> Hi,
>
> I was using motion with RPI camera on RPI 2, and I did not have
> any problems. However, now I want to use RPI 3 due to performance
> reasons.
>
> To install motion I used the same instructions as before, from
> this site:
>
> http://www.codeproject.com/Articles/665518/Raspberry-Pi-as-low-cost-HD-surveillance-camera
>
> <http://www.codeproject.com/Articles/665518/Raspberry-Pi-as-low-cost-HD-surveillance-camera>
>
> The first problem I faced with was caused by:
>
> sudo apt-get install -y libjpeg62 libjpeg62-dev libavformat53
> libavformat-dev libavcodec53 libavcodec-dev libavutil51
> libavutil-dev libc6-dev zlib1g-dev libmysqlclient18
> libmysqlclient-dev libpq5 libpq-dev
>
> The error suggested me to instal libjpeg62-turbo and
> libjpeg62-turbo-dev instead of the first two packages listed above.
>
> Also, I could not install libav packages, so I just used a
> command: *sudo apt-get install libav-tools* instead.
>
> After that I rebooted the RPI3, and motion does not work. My log
> file is empty and I do not have any idea what is the error.
>
> Can you please give me some feedback regarding this issue?
>
> Also, I should mention that my RPI camera works fine without
> motion. So the camera is not the problem.
>
> Thank you in advance,
>
> Slavica
>
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Motion-user mailing list
> [email protected]
> <mailto:[email protected]>
> https://lists.sourceforge.net/lists/listinfo/motion-user
> <https://lists.sourceforge.net/lists/listinfo/motion-user>
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
> <http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome>
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 4
Date: Thu, 06 Oct 2016 04:18:39 +0200
From: Thomas Drebert <[email protected]>
Subject: Re: [Motion-user] How to install motion on raspberry pi 3?
To: Motion discussion list <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
Hello,
nice, thats the first time i hear this.
Have any one test this?
At time i use mpeg-streamer with Motion on the Rpi3 with cam V2.
I record timelabs videos and motion jpg at the same time with fixed night mode
all time. Do the new Motion this better?
regards Thomas
Am 6. Oktober 2016 01:18:00 MESZ, schrieb Mr Dave <[email protected]>:
>The mmal camera (aka Pi camera) is now supported by the project but has
>
>not been packaged yet. As such, you would need to build from source.
>Instructions on building and configuration options can be reviewed
>within the guide here.
>
>http://htmlpreview.github.io/?https://github.com/Motion-Project/motion/blob/master/motion_guide.html#Abbreviated_Building
>
>MrDave
>
>
>On 10/5/2016 5:02 PM, Adam Ali wrote:
>>
>> I thought raspi cam need special binary, search Motion MMAL
>> CMIIW
>>
>>
>> On Oct 6, 2016 5:32 AM, "Slavica Tomovic" <[email protected]
>> <mailto:[email protected]>> wrote:
>>
>> Hi,
>>
>> I was using motion with RPI camera on RPI 2, and I did not have
>> any problems. However, now I want to use RPI 3 due to performance
>> reasons.
>>
>> To install motion I used the same instructions as before, from
>> this site:
>>
>http://www.codeproject.com/Articles/665518/Raspberry-Pi-as-low-cost-HD-surveillance-camera
>>
><http://www.codeproject.com/Articles/665518/Raspberry-Pi-as-low-cost-HD-surveillance-camera>
>>
>> The first problem I faced with was caused by:
>>
>> sudo apt-get install -y libjpeg62 libjpeg62-dev libavformat53
>> libavformat-dev libavcodec53 libavcodec-dev libavutil51
>> libavutil-dev libc6-dev zlib1g-dev libmysqlclient18
>> libmysqlclient-dev libpq5 libpq-dev
>>
>> The error suggested me to instal libjpeg62-turbo and
>> libjpeg62-turbo-dev instead of the first two packages listed
>above.
>>
>> Also, I could not install libav packages, so I just used a
>> command: *sudo apt-get install libav-tools* instead.
>>
>> After that I rebooted the RPI3, and motion does not work. My log
>> file is empty and I do not have any idea what is the error.
>>
>> Can you please give me some feedback regarding this issue?
>>
>> Also, I should mention that my RPI camera works fine without
>> motion. So the camera is not the problem.
>>
>> Thank you in advance,
>>
>> Slavica
>>
>>
>>
>>
>------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> <mailto:[email protected]>
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> <https://lists.sourceforge.net/lists/listinfo/motion-user>
>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>> <http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome>
>>
>>
>>
>>
>------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
>
>
>------------------------------------------------------------------------
>
>------------------------------------------------------------------------------
>Check out the vibrant tech community on one of the world's most
>engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Motion-user mailing list
>[email protected]
>https://lists.sourceforge.net/lists/listinfo/motion-user
>http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
--
Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail gesendet.
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
------------------------------
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
End of Motion-user Digest, Vol 125, Issue 1
*******************************************
