Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Search for video doorbell with Motion support (Modris Bernands)
2. Re: Search for video doorbell with Motion support (Laurent MAHE)
3. motion with rtsp uses near 100% no matter what (Yan Seiner)
4. Re: motion with rtsp uses near 100% no matter what (Mike Wilson)
5. Re: How to install motion on raspberry pi 3? (Mr Dave)
----------------------------------------------------------------------
Message: 1
Date: Thu, 6 Oct 2016 11:46:28 +0300
From: Modris Bernands <[email protected]>
Subject: [Motion-user] Search for video doorbell with Motion support
To: [email protected]
Message-ID:
<CAPOUetXSqYwX4AdqZGmFKeJyCRFwVQV13A24-8gLDDhL7X=6...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Is on market any video doorbell or access control system (on the box) who
allow Motion get video from it?
I want setup pedestrian gate control (on fence perimeter concrete pole)
and get video from built-in cam on Motion for additional usage.
Credibly this cam need to be:
- IP, because of distance (to house/"datacenter")
- non wireless, primary for security (to prevent wifi blockers).
- and of course open for other data collector (Motion), not only for system
included indoor monitors.
Do You know any working product or have information about products who may
fit my case?
--
Modris
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Thu, 6 Oct 2016 10:17:43 +0100
From: Laurent MAHE <[email protected]>
Subject: Re: [Motion-user] Search for video doorbell with Motion
support
To: Motion discussion list <[email protected]>
Message-ID:
<CADZhf+WzXOBedZ0W7GbkNTBcmPOQr_NbJcYVWOqPqYVZm8=a...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
Hi Modris,
I've been looking for this too. I've had a look at Ring
<https://ring.com/plus>, though I'm not sure how it can be customised /
integrated. And with Ring+ it can integrate with smart locks for access
control
Maybe another Motion user has experience with it?
Another option is www.skybell.com but reviews don't appear as good as
ring.com
One to potentially consider is Doorbird
<https://www.doorbird.com/comparison>
On 6 October 2016 at 09:46, Modris Bernands <[email protected]>
wrote:
> Is on market any video doorbell or access control system (on the box) who
> allow Motion get video from it?
>
> I want setup pedestrian gate control (on fence perimeter concrete pole)
> and get video from built-in cam on Motion for additional usage.
> Credibly this cam need to be:
> - IP, because of distance (to house/"datacenter")
> - non wireless, primary for security (to prevent wifi blockers).
> - and of course open for other data collector (Motion), not only for
> system included indoor monitors.
>
> Do You know any working product or have information about products who may
> fit my case?
>
> --
> Modris
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 3
Date: Thu, 6 Oct 2016 06:58:29 -0400
From: Yan Seiner <[email protected]>
Subject: [Motion-user] motion with rtsp uses near 100% no matter what
To: Motion discussion list <[email protected]>
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8; format=flowed
I'm running motion on a pc-engines APU1D4, a dual core embedded box.
I'm seeing 95% to100% cpu utilization with rtsp no matter what other
options I select. Image size, frame rate, streaming, on-the-fly video,
nothing makes a difference, motion pegs at 95% to 100% cpu.
If I go to single frame with http, this drops down the usage to about
30% but it's not reliable enough with my Hikvision camera, so I'm stuck
with rtsp.
Can anyone shed some light on this?
------------------------------
Message: 4
Date: Thu, 06 Oct 2016 20:28:24 +0000
From: Mike Wilson <[email protected]>
Subject: Re: [Motion-user] motion with rtsp uses near 100% no matter
what
To: Motion discussion list <[email protected]>
Message-ID:
<CAAVeUCqfQ=ktt5h+qv2hfaqj-10apvbtgf13fs8qukug3rf...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
RTSP can't change the sizes or speed coming down the pipe. The options
would be in your camera to reduce the resolution or framerate of the
generated RTSP stream. That's probably your best bet.
On Thu, Oct 6, 2016 at 7:15 AM Yan Seiner <[email protected]> wrote:
> I'm running motion on a pc-engines APU1D4, a dual core embedded box.
>
> I'm seeing 95% to100% cpu utilization with rtsp no matter what other
> options I select. Image size, frame rate, streaming, on-the-fly video,
> nothing makes a difference, motion pegs at 95% to 100% cpu.
>
> If I go to single frame with http, this drops down the usage to about
> 30% but it's not reliable enough with my Hikvision camera, so I'm stuck
> with rtsp.
>
> Can anyone shed some light on this?
>
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 5
Date: Thu, 6 Oct 2016 18:51:32 -0600
From: Mr Dave <[email protected]>
Subject: Re: [Motion-user] How to install motion on raspberry pi 3?
To: [email protected]
Message-ID: <[email protected]>
Content-Type: text/plain; charset="windows-1252"
yes, it has been tested.
On 10/5/2016 8:18 PM, Thomas Drebert wrote:
> Hello,
>
> nice, thats the first time i hear this.
> Have any one test this?
> At time i use mpeg-streamer with Motion on the Rpi3 with cam V2.
> I record timelabs videos and motion jpg at the same time with fixed
> night mode all time. Do the new Motion this better?
>
> regards Thomas
>
> Am 6. Oktober 2016 01:18:00 MESZ, schrieb Mr Dave
> <[email protected]>:
>
> The mmal camera (aka Pi camera) is now supported by the project
> but has not been packaged yet. As such, you would need to build
> from source. Instructions on building and configuration options
> can be reviewed within the guide here.
>
>
> http://htmlpreview.github.io/?https://github.com/Motion-Project/motion/blob/master/motion_guide.html#Abbreviated_Building
>
> MrDave
>
>
> On 10/5/2016 5:02 PM, Adam Ali wrote:
>>
>> I thought raspi cam need special binary, search Motion MMAL
>> CMIIW
>>
>>
>> On Oct 6, 2016 5:32 AM, "Slavica Tomovic" <[email protected]
>> <mailto:[email protected]>> wrote:
>>
>> Hi,
>>
>> I was using motion with RPI camera on RPI 2, and I did not
>> have any problems. However, now I want to use RPI 3 due to
>> performance reasons.
>>
>> To install motion I used the same instructions as before,
>> from this site:
>>
>> http://www.codeproject.com/Articles/665518/Raspberry-Pi-as-low-cost-HD-surveillance-camera
>>
>> <http://www.codeproject.com/Articles/665518/Raspberry-Pi-as-low-cost-HD-surveillance-camera>
>>
>> The first problem I faced with was caused by:
>>
>> sudo apt-get install -y libjpeg62 libjpeg62-dev libavformat53
>> libavformat-dev libavcodec53 libavcodec-dev libavutil51
>> libavutil-dev libc6-dev zlib1g-dev libmysqlclient18
>> libmysqlclient-dev libpq5 libpq-dev
>>
>> The error suggested me to instal libjpeg62-turbo and
>> libjpeg62-turbo-dev instead of the first two packages listed
>> above.
>>
>> Also, I could not install libav packages, so I just used a
>> command: *sudo apt-get install libav-tools* instead.
>>
>> After that I rebooted the RPI3, and motion does not work. My
>> log file is empty and I do not have any idea what is the error.
>>
>> Can you please give me some feedback regarding this issue?
>>
>> Also, I should mention that my RPI camera works fine without
>> motion. So the camera is not the problem.
>>
>> Thank you in advance,
>>
>> Slavica
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> <mailto:[email protected]>
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> <https://lists.sourceforge.net/lists/listinfo/motion-user>
>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>> <http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome>
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, SlashDot.org!http://sdm.link/slashdot
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
> ------------------------------------------------------------------------
>
> Check out the vibrant tech community on one of the world's most
> engaging tech sites,SlashDot.org <http://SlashDot.org>!
> http://sdm.link/slashdot
>
> ------------------------------------------------------------------------
>
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
>
> -- Diese Nachricht wurde von meinem Android-Mobiltelefon mit K-9 Mail
> gesendet.
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> http://www.lavrsen.dk/twiki/bin/view/Motion/WebHome
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
------------------------------
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
End of Motion-user Digest, Vol 125, Issue 2
*******************************************
