Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: Motion with Axis network cameras (Jonas Kvinge)
2. Re: Motion with Axis network cameras (MrDave)
----------------------------------------------------------------------
Message: 1
Date: Fri, 6 Jul 2018 20:06:55 +0200
From: Jonas Kvinge <[email protected]>
To: Motion discussion list <[email protected]>,
tosiara <[email protected]>
Subject: Re: [Motion-user] Motion with Axis network cameras
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
I've already seen the issue. I'm not using pictures, only video. I
believe the issue is about not being able to capture pictures in
highres. The reporter states that he is able to capture video using
highres url, so I believe there is a problem with my configuration.
My problem is that the videos are not using netcam_highres.
I've tried to build the latest revision from git 1b16fe9.
Jonas
On 06. juli 2018 19:50, tosiara wrote:
> Can you check this link:
> https://github.com/Motion-Project/motion/issues/737
> Is it the same issue you have?
>
> On Fri, Jul 6, 2018 at 8:14 PM, Jonas Kvinge via Motion-user
> <[email protected]
> <mailto:[email protected]>> wrote:
>
> Hello,
>
> I'm trying to optimize my configuration for best possible
> recording and best motion detection.
> I got 6 Axis cameras. 3 are placed outside, while 3 are placed
> inside the house.
> I got two AXIS M1125 in the driveway, and one M2025-LE outside the
> front door of the house.
> Inside I got one M3005, one M3045-V and one M3045-WV, all are
> running to a POE switch except M3045-WV that's the only one that's
> wifi.
>
> I'm trying to capture the best video, while using a lower
> resolution for motion detection. I have set ffmpeg_passthrough,
> but it looks like it captures the video using netcam_url instead
> of netcam_highres.
>
> Here is my configuration:
>
> motion.conf (common for all cameras).
>
> daemon off
>
> process_id_file /var/run/motion/motion.pid
>
> netcam_keepalive on
> target_dir /mnt/data/motion
>
> movie_filename %Y%m%d%H%M%S-netcam%t-%v
> picture_filename %Y%m%d%H%M%S-netcam%t-%v
>
> camera /etc/motion/camera1.conf
> camera /etc/motion/camera2.conf
> camera /etc/motion/camera3.conf
> camera /etc/motion/camera4.conf
> camera /etc/motion/camera5.conf
> camera /etc/motion/camera6.conf
>
> logfile /var/log/motion.log
>
> output_pictures off
>
> ffmpeg_output_movies on
> ffmpeg_video_codec mp4
> ffmpeg_duplicate_frames off
> ffmpeg_passthrough on
>
> Here is camera1.conf, I use similar configuration for the other
> cameras:
>
> # AXIS M1125 Network Camera
> camera_id 1
> camera_name OutsideDriveWay
> #netcam_url http://netcam1/mjpg/video.mjpg?resolution=640x480
> <http://netcam1/mjpg/video.mjpg?resolution=640x480>
> netcam_url http://netcam1/mjpg/video.mjpg
> netcam_highres rtsp://netcam1/axis-media/media.amp
> target_dir /mnt/data/motion/camera1
>
> width 1920
> height 1080
> framerate 25
>
> threshold 1000
> threshold_tune off
> noise_level 50
> noise_tune off
>
> minimum_motion_frames 3
> pre_capture 0
> post_capture 200
>
> text_changes off
>
> If I try to use: netcam_url
> http://netcam1/mjpg/video.mjpg?resolution=640x480
> <http://netcam1/mjpg/video.mjpg?resolution=640x480> instead just
> netcam_url http://netcam1/mjpg/video.mjpg
> It still captures video using netcam_url with the resolution set
> in the url instead of netcam_highres.
> I've tried to remove ffmpeg_video_codec also. What am I missing?
>
> Jonas
>
>
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Motion-user mailing list
> [email protected]
> <mailto:[email protected]>
> https://lists.sourceforge.net/lists/listinfo/motion-user
> <https://lists.sourceforge.net/lists/listinfo/motion-user>
> https://motion-project.github.io/ <https://motion-project.github.io/>
>
> Unsubscribe:
> https://lists.sourceforge.net/lists/options/motion-user
> <https://lists.sourceforge.net/lists/options/motion-user>
>
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
Message: 2
Date: Fri, 6 Jul 2018 17:15:32 -0600
From: MrDave <[email protected]>
To: [email protected]
Subject: Re: [Motion-user] Motion with Axis network cameras
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"; Format="flowed"
The passthrough option is documented to only work for the RTSP and RTMP
protocols.
(https://rawgit.com/Motion-Project/motion/master/motion_config.html#ffmpeg_passthrough).
If you want to use HTTP, you can try the MJPEG workaround and specify
the URL as MJPEG:// and it may work but its never been tested to my
knowledge.
(https://rawgit.com/Motion-Project/motion/master/motion_config.html#netcam_url)
URLs beginning with HTTP:// definitely won't work for passthrough since
the code that processes those is designed for older network cameras or
when Motion is compiled without ffmpeg.
Dave
On 7/6/2018 12:06 PM, Jonas Kvinge via Motion-user wrote:
>
> I've already seen the issue. I'm not using pictures, only video. I
> believe the issue is about not being able to capture pictures in
> highres. The reporter states that he is able to capture video using
> highres url, so I believe there is a problem with my configuration.
> My problem is that the videos are not using netcam_highres.
> I've tried to build the latest revision from git 1b16fe9.
>
> Jonas
>
>
> On 06. juli 2018 19:50, tosiara wrote:
>> Can you check this link:
>> https://github.com/Motion-Project/motion/issues/737
>> Is it the same issue you have?
>>
>> On Fri, Jul 6, 2018 at 8:14 PM, Jonas Kvinge via Motion-user
>> <[email protected]
>> <mailto:[email protected]>> wrote:
>>
>> Hello,
>>
>> I'm trying to optimize my configuration for best possible
>> recording and best motion detection.
>> I got 6 Axis cameras. 3 are placed outside, while 3 are placed
>> inside the house.
>> I got two AXIS M1125 in the driveway, and one M2025-LE outside
>> the front door of the house.
>> Inside I got one M3005, one M3045-V and one M3045-WV, all are
>> running to a POE switch except M3045-WV that's the only one
>> that's wifi.
>>
>> I'm trying to capture the best video, while using a lower
>> resolution for motion detection. I have set ffmpeg_passthrough,
>> but it looks like it captures the video using netcam_url instead
>> of netcam_highres.
>>
>> Here is my configuration:
>>
>> motion.conf (common for all cameras).
>>
>> daemon off
>>
>> process_id_file /var/run/motion/motion.pid
>>
>> netcam_keepalive on
>> target_dir /mnt/data/motion
>>
>> movie_filename %Y%m%d%H%M%S-netcam%t-%v
>> picture_filename %Y%m%d%H%M%S-netcam%t-%v
>>
>> camera /etc/motion/camera1.conf
>> camera /etc/motion/camera2.conf
>> camera /etc/motion/camera3.conf
>> camera /etc/motion/camera4.conf
>> camera /etc/motion/camera5.conf
>> camera /etc/motion/camera6.conf
>>
>> logfile /var/log/motion.log
>>
>> output_pictures off
>>
>> ffmpeg_output_movies on
>> ffmpeg_video_codec mp4
>> ffmpeg_duplicate_frames off
>> ffmpeg_passthrough on
>>
>> Here is camera1.conf, I use similar configuration for the other
>> cameras:
>>
>> # AXIS M1125 Network Camera
>> camera_id 1
>> camera_name OutsideDriveWay
>> #netcam_url http://netcam1/mjpg/video.mjpg?resolution=640x480
>> <http://netcam1/mjpg/video.mjpg?resolution=640x480>
>> netcam_url http://netcam1/mjpg/video.mjpg
>> netcam_highres rtsp://netcam1/axis-media/media.amp
>> target_dir /mnt/data/motion/camera1
>>
>> width 1920
>> height 1080
>> framerate 25
>>
>> threshold 1000
>> threshold_tune off
>> noise_level 50
>> noise_tune off
>>
>> minimum_motion_frames 3
>> pre_capture 0
>> post_capture 200
>>
>> text_changes off
>>
>> If I try to use: netcam_url
>> http://netcam1/mjpg/video.mjpg?resolution=640x480
>> <http://netcam1/mjpg/video.mjpg?resolution=640x480> instead just
>> netcam_url http://netcam1/mjpg/video.mjpg
>> It still captures video using netcam_url with the resolution set
>> in the url instead of netcam_highres.
>> I've tried to remove ffmpeg_video_codec also. What am I missing?
>>
>> Jonas
>>
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> <mailto:[email protected]>
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> <https://lists.sourceforge.net/lists/listinfo/motion-user>
>> https://motion-project.github.io/ <https://motion-project.github.io/>
>>
>> Unsubscribe:
>> https://lists.sourceforge.net/lists/options/motion-user
>> <https://lists.sourceforge.net/lists/options/motion-user>
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org!http://sdm.link/slashdot
>>
>>
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> https://motion-project.github.io/
>>
>> Unsubscribe:https://lists.sourceforge.net/lists/options/motion-user
>
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 145, Issue 19
********************************************
