Send Motion-user mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.sourceforge.net/lists/listinfo/motion-user
or, via email, send a message with subject or body 'help' to
[email protected]
You can reach the person managing the list at
[email protected]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Motion-user digest..."
Today's Topics:
1. Re: newbie problems (tosiara)
2. Re: newbie problems (vector457)
3. Re: Log Errors (Harlan Daneker)
----------------------------------------------------------------------
Message: 1
Date: Tue, 11 Jun 2019 12:18:30 +0300
From: tosiara <[email protected]>
To: Motion discussion list <[email protected]>
Subject: Re: [Motion-user] newbie problems
Message-ID:
<CACHTdwTQ0A4Sy51=Njn6=+3kmynj1u2g1_uf3scy1r6ymwe...@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
Your camera does not support TCP transport. Change your config to:
netcam_use_tcp off
On Tue, Jun 11, 2019 at 12:11 PM vector457 <[email protected]> wrote:
>
> thanks please find attached..looks like a "transport" error?
>
> On 11/6/19 5:17 pm, tosiara wrote:
> > Please provide full log with -d 7 command line switch
> >
> > On Mon, Jun 10, 2019 at 11:03 PM vector457 <[email protected]> wrote:
> >> thanks for reply.
> >> Strange. This morning i tried locahost:8080 and cam1 appeared so that
> >> seems to be working now. Not sure why it wasnt last night. What was
> >> interesting last night when it wasnt was that the Camera list was the
> >> default Camera1 and not what I had renamed it too, as if localhost wasnt
> >> using the conf file info. This morning its indeed using the renamed
> >> cameras. Browser cache problem? Even tho I tried a number of refresh.
> >> Browser running from the same machine as motion is.
> >>
> >> tried ffplay rtsp://user:[email protected]/onvif1, worked as expected.
> >> tried restarting motion same problem
> >>
> >> [2:ml2:MyCam2] [NTC] [ALL] motion_loop: Thread exiting
> >> [0:motion] [NTC] [ALL] main: Motion thread 2 restart
> >> [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 102 is from
> >> /etc/motion/camera2.conf
> >> [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 102 Camera Name:
> >> MyCam2 Service: rtsp:
> >> [2:ml2:MyCam2] [NTC] [ALL] motion_init: Camera 102 started: motion
> >> detection Enabled
> >> [2:ml2:MyCam2] [NTC] [VID] vid_start: Opening Netcam RTSP
> >> [2:ml2:MyCam2] [ERR] [NET] netcam_rtsp_open_context: Normal resolution:
> >> Unable to open camera(MyCam2): Invalid data found when processing input
> >> [2:ml2:MyCam2] [NTC] [NET] netcam_rtsp_cleanup: Normal resolution: Shut
> >> down complete.
> >> [2:ml2:MyCam2] [ERR] [VID] vid_start: Netcam RTSP failed to open
> >> [2:ml2:MyCam2] [WRN] [ALL] motion_init: Could not fetch initial image from
> >> camera
> >>
> >>
> >> On 11/6/19 12:44 am, tosiara wrote:
> >>
> >> 1. You can't see the stream, probably, because you are trying from
> >> another machine?
> >> Try to set "stream_localhost off". Will that work?
> >> I wonder how does it "say no cameras running"? Provide either log or
> >> screenshot of the message
> >>
> >> 2. What URL is used for camera? Please provide the full log
> >>
> >> Do not use VLC for verification. Always test with "ffplay"
> >>
> >> On Mon, Jun 10, 2019 at 11:48 AM vector457 <[email protected]> wrote:
> >>
> >> Hi all,
> >>
> >> installed motion on Ubuntu18
> >>
> >> I can see both of my two network cameras using VLC. they are old cams but
> >> working.
> >>
> >> I have attached copy of motion.conf
> >>
> >> rtsp://user:[email protected]/11 {tenvis 1p391w or similar(no further
> >> info)camera}
> >>
> >> rtsp://user:[email protected]/onvif1 {sricam SP007 or similar(no
> >> further info on it)camera}
> >>
> >> I used camera1-dist.conf file for both, modifying name ,id and netcam url
> >>
> >> to create camera1.conf and camera2.conf.
> >>
> >> Problem 1 no local host view.
> >>
> >> I ran,mark@fatcat:~$ motion
> >>
> >> [0:motion] [NTC] [ALL] conf_load: Processing thread 0 - config file
> >> /etc/motion/motion.conf
> >> [0:motion] [NTC] [ALL] config_camera: Processing camera config file
> >> /etc/motion/camera1.conf
> >> [0:motion] [NTC] [ALL] motion_startup: Logging to syslog
> >> [0:motion] [NTC] [ALL] motion_startup: Motion 4.2.2 Started
> >> [0:motion] [NTC] [ALL] motion_startup: Using default log type (ALL)
> >> [0:motion] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
> >> [0:motion] [NTC] [STR] webu_start_strm: Starting all camera streams on
> >> port 8081
> >> [0:motion] [NTC] [STR] webu_start_strm: Unable to start stream for camera 0
> >> [0:motion] [NTC] [STR] webu_start_ctrl: Starting webcontrol on port 8080
> >> [0:motion] [NTC] [STR] webu_start_ctrl: Unable to start MHD
> >> [0:motion] [NTC] [ENC] ffmpeg_global_init: ffmpeg libavcodec version
> >> 57.107.100 libavformat version 57.83.100
> >> [0:motion] [NTC] [ALL] translate_init: Language: English
> >> [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 101 is from
> >> /etc/motion/camera1.conf
> >> [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 101 Camera Name:
> >> MyCam1 Service: rtsp:
> >> [0:motion] [NTC] [ALL] main: Waiting for threads to finish, pid: 21036
> >> [1:ml1:MyCam1] [NTC] [ALL] motion_init: Camera 101 started: motion
> >> detection Enabled
> >> [1:ml1:MyCam1] [NTC] [VID] vid_start: Opening Netcam RTSP
> >> [1:ml1:MyCam1] [NTC] [NET] netcam_rtsp_connect: Normal resolution: Camera
> >> (MyCam1) connected
> >> [1:ml1:MyCam1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer
> >> to 1 items
> >> [2:nc2:MyCam1] [NTC] [NET] netcam_rtsp_handler: Normal resolution: Camera
> >> handler thread [2] started
> >> [2:nc2:MyCam1] [NTC] [NET] netcam_rtsp_connect: Normal resolution: Camera
> >> (MyCam1) connected
> >> [1:ml1:MyCam1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer
> >> to 4 items
> >> [1:ml1:MyCam1] [NTC] [EVT] event_newfile: File of type 8 saved to:
> >> ./CAM01_101-01-20190610181942.mkv
> >>
> >> The mkv is indeed in my local dir and is capturing images as expected. But
> >> yet when I go to web browser(firefox) localhost:8080 it says no cameras
> >> running. I expected to see a live view?
> >>
> >> Problem 2
> >>
> >> camera 2 the onvif1 errors with
> >>
> >> Unable to open camera(MyCam2): Invalid data found when processing input
> >> not sure why its works from this url in VLC.
> >>
> >>
> >> thoughts?
> >>
> >> _______________________________________________
> >> Motion-user mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/motion-user
> >> https://motion-project.github.io/
> >>
> >> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>
> >> _______________________________________________
> >> Motion-user mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/motion-user
> >> https://motion-project.github.io/
> >>
> >> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>
> >>
> >
> > _______________________________________________
> > Motion-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
------------------------------
Message: 2
Date: Tue, 11 Jun 2019 19:30:21 +1000
From: vector457 <[email protected]>
To: [email protected]
Subject: Re: [Motion-user] newbie problems
Message-ID: <[email protected]>
Content-Type: text/plain; charset=utf-8; format=flowed
awesome that did it thankyou
On 11/6/19 7:18 pm, tosiara wrote:
> Your camera does not support TCP transport. Change your config to:
> netcam_use_tcp off
>
> On Tue, Jun 11, 2019 at 12:11 PM vector457 <[email protected]> wrote:
>> thanks please find attached..looks like a "transport" error?
>>
>> On 11/6/19 5:17 pm, tosiara wrote:
>>> Please provide full log with -d 7 command line switch
>>>
>>> On Mon, Jun 10, 2019 at 11:03 PM vector457 <[email protected]> wrote:
>>>> thanks for reply.
>>>> Strange. This morning i tried locahost:8080 and cam1 appeared so that
>>>> seems to be working now. Not sure why it wasnt last night. What was
>>>> interesting last night when it wasnt was that the Camera list was the
>>>> default Camera1 and not what I had renamed it too, as if localhost wasnt
>>>> using the conf file info. This morning its indeed using the renamed
>>>> cameras. Browser cache problem? Even tho I tried a number of refresh.
>>>> Browser running from the same machine as motion is.
>>>>
>>>> tried ffplay rtsp://user:[email protected]/onvif1, worked as expected.
>>>> tried restarting motion same problem
>>>>
>>>> [2:ml2:MyCam2] [NTC] [ALL] motion_loop: Thread exiting
>>>> [0:motion] [NTC] [ALL] main: Motion thread 2 restart
>>>> [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 102 is from
>>>> /etc/motion/camera2.conf
>>>> [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 102 Camera Name:
>>>> MyCam2 Service: rtsp:
>>>> [2:ml2:MyCam2] [NTC] [ALL] motion_init: Camera 102 started: motion
>>>> detection Enabled
>>>> [2:ml2:MyCam2] [NTC] [VID] vid_start: Opening Netcam RTSP
>>>> [2:ml2:MyCam2] [ERR] [NET] netcam_rtsp_open_context: Normal resolution:
>>>> Unable to open camera(MyCam2): Invalid data found when processing input
>>>> [2:ml2:MyCam2] [NTC] [NET] netcam_rtsp_cleanup: Normal resolution: Shut
>>>> down complete.
>>>> [2:ml2:MyCam2] [ERR] [VID] vid_start: Netcam RTSP failed to open
>>>> [2:ml2:MyCam2] [WRN] [ALL] motion_init: Could not fetch initial image from
>>>> camera
>>>>
>>>>
>>>> On 11/6/19 12:44 am, tosiara wrote:
>>>>
>>>> 1. You can't see the stream, probably, because you are trying from
>>>> another machine?
>>>> Try to set "stream_localhost off". Will that work?
>>>> I wonder how does it "say no cameras running"? Provide either log or
>>>> screenshot of the message
>>>>
>>>> 2. What URL is used for camera? Please provide the full log
>>>>
>>>> Do not use VLC for verification. Always test with "ffplay"
>>>>
>>>> On Mon, Jun 10, 2019 at 11:48 AM vector457 <[email protected]> wrote:
>>>>
>>>> Hi all,
>>>>
>>>> installed motion on Ubuntu18
>>>>
>>>> I can see both of my two network cameras using VLC. they are old cams but
>>>> working.
>>>>
>>>> I have attached copy of motion.conf
>>>>
>>>> rtsp://user:[email protected]/11 {tenvis 1p391w or similar(no further
>>>> info)camera}
>>>>
>>>> rtsp://user:[email protected]/onvif1 {sricam SP007 or similar(no
>>>> further info on it)camera}
>>>>
>>>> I used camera1-dist.conf file for both, modifying name ,id and netcam url
>>>>
>>>> to create camera1.conf and camera2.conf.
>>>>
>>>> Problem 1 no local host view.
>>>>
>>>> I ran,mark@fatcat:~$ motion
>>>>
>>>> [0:motion] [NTC] [ALL] conf_load: Processing thread 0 - config file
>>>> /etc/motion/motion.conf
>>>> [0:motion] [NTC] [ALL] config_camera: Processing camera config file
>>>> /etc/motion/camera1.conf
>>>> [0:motion] [NTC] [ALL] motion_startup: Logging to syslog
>>>> [0:motion] [NTC] [ALL] motion_startup: Motion 4.2.2 Started
>>>> [0:motion] [NTC] [ALL] motion_startup: Using default log type (ALL)
>>>> [0:motion] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
>>>> [0:motion] [NTC] [STR] webu_start_strm: Starting all camera streams on
>>>> port 8081
>>>> [0:motion] [NTC] [STR] webu_start_strm: Unable to start stream for camera 0
>>>> [0:motion] [NTC] [STR] webu_start_ctrl: Starting webcontrol on port 8080
>>>> [0:motion] [NTC] [STR] webu_start_ctrl: Unable to start MHD
>>>> [0:motion] [NTC] [ENC] ffmpeg_global_init: ffmpeg libavcodec version
>>>> 57.107.100 libavformat version 57.83.100
>>>> [0:motion] [NTC] [ALL] translate_init: Language: English
>>>> [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 101 is from
>>>> /etc/motion/camera1.conf
>>>> [0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 101 Camera Name:
>>>> MyCam1 Service: rtsp:
>>>> [0:motion] [NTC] [ALL] main: Waiting for threads to finish, pid: 21036
>>>> [1:ml1:MyCam1] [NTC] [ALL] motion_init: Camera 101 started: motion
>>>> detection Enabled
>>>> [1:ml1:MyCam1] [NTC] [VID] vid_start: Opening Netcam RTSP
>>>> [1:ml1:MyCam1] [NTC] [NET] netcam_rtsp_connect: Normal resolution: Camera
>>>> (MyCam1) connected
>>>> [1:ml1:MyCam1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer
>>>> to 1 items
>>>> [2:nc2:MyCam1] [NTC] [NET] netcam_rtsp_handler: Normal resolution: Camera
>>>> handler thread [2] started
>>>> [2:nc2:MyCam1] [NTC] [NET] netcam_rtsp_connect: Normal resolution: Camera
>>>> (MyCam1) connected
>>>> [1:ml1:MyCam1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer
>>>> to 4 items
>>>> [1:ml1:MyCam1] [NTC] [EVT] event_newfile: File of type 8 saved to:
>>>> ./CAM01_101-01-20190610181942.mkv
>>>>
>>>> The mkv is indeed in my local dir and is capturing images as expected. But
>>>> yet when I go to web browser(firefox) localhost:8080 it says no cameras
>>>> running. I expected to see a live view?
>>>>
>>>> Problem 2
>>>>
>>>> camera 2 the onvif1 errors with
>>>>
>>>> Unable to open camera(MyCam2): Invalid data found when processing input
>>>> not sure why its works from this url in VLC.
>>>>
>>>>
>>>> thoughts?
>>>>
>>>> _______________________________________________
>>>> Motion-user mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>>>> https://motion-project.github.io/
>>>>
>>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>>>>
>>>> _______________________________________________
>>>> Motion-user mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>>>> https://motion-project.github.io/
>>>>
>>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>>>>
>>>>
>>> _______________________________________________
>>> Motion-user mailing list
>>> [email protected]
>>> https://lists.sourceforge.net/lists/listinfo/motion-user
>>> https://motion-project.github.io/
>>>
>>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>>
>> _______________________________________________
>> Motion-user mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/motion-user
>> https://motion-project.github.io/
>>
>> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
------------------------------
Message: 3
Date: Tue, 11 Jun 2019 06:53:06 -0400
From: Harlan Daneker <[email protected]>
To: Motion discussion list <[email protected]>
Subject: Re: [Motion-user] Log Errors
Message-ID:
<cac1wkitxazhd0g++h+lt_fnyhypu8x_twhlk1yjybs75uth...@mail.gmail.com>
Content-Type: text/plain; charset="utf-8"
What is -d 7?
On Tue, Jun 11, 2019 at 4:42 AM tosiara <[email protected]> wrote:
> So it is now clear that the command works fine.
>
> Now put back this line into your config:
>
> extpipe ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size %wx%h
> -framerate %fps -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4
> %f.mp4
>
> Reproduce the issue and send full log with -d 7
>
> On Tue, Jun 11, 2019 at 3:53 AM Harlan Daneker <[email protected]> wrote:
> >
> >
> > Thank you for replying, here is the output.
> >
> >
> > ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size 320x240 -framerate 5
> -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 test.mp4
> > ffmpeg version 4.1.3 Copyright (c) 2000-2019 the FFmpeg developers
> > built with gcc 9 (GCC)
> > configuration: --prefix=/usr --bindir=/usr/bin
> --datadir=/usr/share/ffmpeg --docdir=/usr/share/doc/ffmpeg
> --incdir=/usr/include/ffmpeg --libdir=/usr/lib64 --mandir=/usr/share/man
> --arch=x86_64 --optflags='-O2 -g -pipe -Wall -Werror=format-security
> -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -fexceptions
> -fstack-protector-strong -grecord-gcc-switches
> -specs=/usr/lib/rpm/redhat/redhat-hardened-cc1
> -specs=/usr/lib/rpm/redhat/redhat-annobin-cc1 -m64 -mtune=generic
> -fasynchronous-unwind-tables -fstack-clash-protection -fcf-protection'
> --extra-ldflags='-Wl,-z,relro -Wl,--as-needed -Wl,-z,now
> -specs=/usr/lib/rpm/redhat/redhat-hardened-ld ' --extra-cflags=' '
> --enable-libopencore-amrnb --enable-libopencore-amrwb
> --enable-libvo-amrwbenc --enable-version3 --enable-bzlib
> --disable-crystalhd --enable-fontconfig --enable-frei0r --enable-gcrypt
> --enable-gnutls --enable-ladspa --enable-libaom --enable-libass
> --enable-libbluray --enable-libcdio --enable-libdrm --enable-indev=jack
> --enable-libfreetype --enable-libfribidi --enable-libgsm
> --enable-libmp3lame --enable-nvenc --enable-openal --enable-opencl
> --enable-opengl --enable-libopenjpeg --enable-libopus --enable-libpulse
> --enable-librsvg --enable-libsoxr --enable-libspeex --enable-libssh
> --enable-libtheora --enable-libvorbis --enable-libv4l2 --enable-libvidstab
> --enable-libvmaf --enable-libvpx --enable-libx264 --enable-libx265
> --enable-libxvid --enable-libzvbi --enable-avfilter --enable-avresample
> --enable-postproc --enable-pthreads --disable-static --enable-shared
> --enable-gpl --disable-debug --disable-stripping --shlibdir=/usr/lib64
> --enable-libmfx --enable-runtime-cpudetect
> > libavutil 56. 22.100 / 56. 22.100
> > libavcodec 58. 35.100 / 58. 35.100
> > libavformat 58. 20.100 / 58. 20.100
> > libavdevice 58. 5.100 / 58. 5.100
> > libavfilter 7. 40.101 / 7. 40.101
> > libavresample 4. 0. 0 / 4. 0. 0
> > libswscale 5. 3.100 / 5. 3.100
> > libswresample 3. 3.100 / 3. 3.100
> > libpostproc 55. 3.100 / 55. 3.100
> >
> > On Mon, Jun 10, 2019 at 10:42 AM tosiara <[email protected]> wrote:
> >>
> >> "Does not work" does not contain enough information, do you agree?
> >>
> >> Try to run the command in your console:
> >>
> >> ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size 320x240 -framerate
> >> 5 -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 test.mp4
> >>
> >> This should hang waiting for video on stdin. Copy the output and kill
> >> with CTRL+C. Send the output
> >>
> >> On Mon, Jun 10, 2019 at 5:15 PM Harlan Daneker <[email protected]>
> wrote:
> >> >
> >> > motion 4.1.1+git20180626-43b9c2b
> >> >
> >> >
> >> > This does not work:
> >> > extpipe ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size %wx%h
> -framerate %fps -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 %f.mp4
> >> >
> >> > I have tried as many of the video formats as I was able to find and
> none of them work.
> >> >
> >> > So I just omitted "rawvideo -pix_fmt" and it works.
> >> > extpipe ffmpeg -y -video_size %wx%h -framerate %fps -i pipe:0 -vcodec
> libx264 -preset ultrafast -f mp4 %f.mp4
> >> >
> >> > But I constantly get these errors in motion.log:
> >> > Motion.log
> >> > [1:ml1] [ERR] [EVT] [Jun 09 21:32:56] event_extpipe_put: Error
> writing in pipe , state error 1: Broken pipe
> >> > [1:ml1] [ERR] [EVT] Above message repeats 29 times
> >> > [1:ml1] [ERR] [EVT] [Jun 09 21:32:57] event_extpipe_put: Error
> writing in pipe , state error 1: Broken pipe
> >> > [1:ml1] [ERR] [EVT] Above message repeats 29 times
> >> > [1:ml1] [ERR] [EVT] [Jun 09 21:32:58] event_extpipe_put: Error
> writing in pipe , state error 1: Broken pipe
> >> > [1:ml1] [ERR] [EVT] Above message repeats 29 times
> >> > [1:ml1] [ERR] [EVT] [Jun 09 21:32:59] event_extpipe_put: Error
> writing in pipe , state error 1: Broken pipe
> >> > [1:ml1] [ERR] [EVT] Above message repeats 12 times
> >> > [1:ml1] [ERR] [EVT] [Jun 09 21:33:03] event_extpipe_put: Error
> writing in pipe , state error 1: Broken pipe
> >> > [1:ml1] [ERR] [EVT] Above message repeats 26 times
> >> > [1:ml1] [ERR] [EVT] [Jun 09 21:33:04] event_extpipe_put: Error
> writing in pipe , state error 1: Broken pipe
> >> > [1:ml1] [ERR] [EVT] Above message repeats 29 times
> >> > [1:ml1] [ERR] [EVT] [Jun 09 21:33:05] event_extpipe_put: Error
> writing in pipe , state error 1: Broken pipe
> >> > _______________________________________________
> >> > Motion-user mailing list
> >> > [email protected]
> >> > https://lists.sourceforge.net/lists/listinfo/motion-user
> >> > https://motion-project.github.io/
> >> >
> >> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >>
> >>
> >> _______________________________________________
> >> Motion-user mailing list
> >> [email protected]
> >> https://lists.sourceforge.net/lists/listinfo/motion-user
> >> https://motion-project.github.io/
> >>
> >> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
> >
> > _______________________________________________
> > Motion-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/motion-user
> > https://motion-project.github.io/
> >
> > Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
>
> _______________________________________________
> Motion-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/motion-user
> https://motion-project.github.io/
>
> Unsubscribe: https://lists.sourceforge.net/lists/options/motion-user
>
-------------- next part --------------
An HTML attachment was scrubbed...
------------------------------
------------------------------
Subject: Digest Footer
_______________________________________________
Motion-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/motion-user
------------------------------
End of Motion-user Digest, Vol 156, Issue 20
********************************************
