If you use trigtype=first and the failure occurs after the triggered queue is open, then a re-trigger occurs automatically. If the failure occurs before the triggered queue is open, then you probablydon't want to retrigger anyway, as you would likely just fail again and again and again.
> -----Original Message----- > From: WOLFENDEN, Kevin [SMTP:[EMAIL PROTECTED]] > Sent: Wednesday, May 15, 2002 7:34 AM > To: [EMAIL PROTECTED] > Subject: Re-triggering a process > > Hi > is there a way of re-triggering a process that has fired and failed, other > than by changing the Q attributes (from depth 1 to depth x) ? > > TIA > > Kevin Wolfenden > > > > __________________________________________________________________________ > _ > This email is confidential and intended solely for the use of the > individual to whom it is addressed. Any views or opinions presented are > solely those of the author and do not necessarily represent those of > SchlumbergerSema. > If you are not the intended recipient, be advised that you have received > this > email in error and that any use, dissemination, forwarding, printing, or > copying of this email is strictly prohibited. > > If you have received this email in error please notify the > SchlumbergerSema Helpdesk by telephone on +44 (0) 121 627 5600. > __________________________________________________________________________ > _ > > Instructions for managing your mailing list subscription are provided in > the Listserv General Users Guide available at http://www.lsoft.com > Archive: http://vm.akh-wien.ac.at/MQSeries.archive Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive
