Hi Tobias, all, today I tested MRTG's IPv6 support against an experimental Cisco IOS release with SNMP over IPv6 support, and I noticed a bug in the IPv6 code: SNMP_util and cfgmaker won't parse numeric IPv6 addresses properly unless they are followed by SNMP options.
So [EMAIL PROTECTED]:760:4::1]:161 would work, but [EMAIL PROTECTED]:760:4::1] would not. I never noticed this before because the only IPv6 SNMP agent I tested it on was not on port 161, so I always specified options. I attach a patch against 2.10.0pre1 which should fix the problem and makes one or two small cleanups to the IPv6 code. If possible, I think it should be applied before the next release. Other than that, cfgmaker and mrtg seemed to work fine over IPv6 with the experimental Cisco IOS. This is good news for people running IPv6-only networks! Regards, Lorenzo -- Attached file removed by Ecartis and put at URL below -- -- Type: text/plain -- Size: 2k (2817 bytes) -- URL : http://www.ee.ethz.ch/~slist/p/patch-mrtg-2.10.0pre1-numericv6 -- Unsubscribe mailto:[EMAIL PROTECTED] Help mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg-developers
