Hello Guru's,
I am having strange problem hope I will get help from you all.
I am graphing 4 interface on CISCO router ,
values for three interface are accurate except the remaining.
I am expecting much higher values on graphs.
This Interface is supposed to flow at the rate of 1.5 Mb the graphs shows
300 kb.
mrtg's are made by taking port No by snmpwalk which for this interface is
13.
#-ROUTER--------------------------------------------------
Target[CISCO]: 13:[EMAIL PROTECTED]
MaxBytes[CISCO]: 150000
Title[CISCO]: : CISCO
PageTop[CISCO]: <H1>CISCO
</H1>
<TABLE>
<TR><TD>System:</TD><TD>CISCO<TD></TR>
<TR><TD>Maintainer:</TD><TD>CISCO</TD></TR>
<TR><TD>Interface:</TD><TD>Ethernet 2/3</TD></TR>
<TR><TD>IP: 192.168.1.1</TD><TD>CISCO</TR>
<TR><TD>Max Speed:</TD>
<TD>150000 kBits/s</TD></TR>
</TABLE>
where am i going wrong please help me.
Regards,
Rikunj
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
