Did you try running mrtg with debugging flags on? You can also turning logging at the command line to capture your output. At least then you would know what it's doing and you might even see an error. Look at the man page for options.
Tanya Ruttenberg - RSIS Contractor OTSO/DNE/NMPEB [EMAIL PROTECTED] 410-965-9605 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Matt Kowske Sent: Thursday, December 08, 2005 10:43 AM To: [EMAIL PROTECTED] Subject: [mrtg] mrtg produces no output Hi I'm having a problem with mrtg. I've set it up with cfgmaker and made sure the WorkDir option is set to a directory that exists and is writeable. I run "mrtg mrtg.cfg" and it runs fine with no errors but no output is produced in the WorkDir. Nothing. No png's, or html's or anything. I've tried it with two different cfg files that point to two different snmp servers, but neither work. I've searched google, groups, documentation and can't find any kind of solution to this. I can post config files if needed. I remember the first time I ran it it DID produce something in the WorkDir, but I didn't have it set to the correct directory so I rm -rf'd it and tried again and that's when the problem started. Now no matter what I do I can't get any output. Also, this is on a CentOS box installed from an rpm. Thanks. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://lists.ee.ethz.ch/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://lists.ee.ethz.ch/lsg2.cgi
