On 3/26/07, Forthofer Russ <[EMAIL PROTECTED]> wrote:
I ran some additional tests, and it appears to me the 64-bit data may be bogus. It would report 4K utilization on a link that should be about 50M or better. I did find out from Nortel that the OM3500 does NOT support SNMPv2 - only SNMPv1. (I was hoping I just had to flip a switch somewhere.) So, it appears that my only option is to increase my polling frequency. I have not checked the enterprise MIB, as you suggested, but I will do that now. Not really holding too much hope for that, though. Thanks for your help. Russ
Russ, How fast are your interfaces? With 32-bit counters you should be able to successfully graph bit over 100 mbps with 5-minute polling. Yet you mentioned 50M - is that megabytes or megabits? If megabits then the 5-minute polling cycle should work just fine. If megabytes then you'll need to go to a 1-minute polling interval which is good to about 550 megabits/second if I recall correctly. Regards, -- Eric Brander
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
