The last two entries are the same devices. I am using different vlan gateways currently, but there are errors with the log pull for the vlan interface that I do not get with the mgmt vlan ip.
#--------------------------------------------------------------- Target[10.0.0.1]: 45:public@10.0.0.1 MaxBytes[10.0.0.1]: 12500000 Title[10.0.0.1]: HP 8212zl(10.0.0.1): ether0 PageTop[10.0.0.1]: <H1>Traffic Analysis for Port B22</H1> <TABLE> <TR><TD>System:</TD><TD> MS Core </TD></TR> <TR><TD>Maintainer:</TD><TD>L2 to STEM</TD></TR> <TR><TD>Interface:</TD><TD>SFP A1</TD></TR> <TR><TD>IP:</TD><TD>sample-device(10.0.0.1)</TD></TR> <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR> </TABLE> #--------------------------------------------------------------- Target[172.31.254.254]: 95:public@172.31.254.254 MaxBytes[172.31.254.254]: 12500000 Title[172.31.254.254]: HP 8212zl(172.31.254.254): ether0 PageTop[172.31.254.254]: <H1>Traffic Analysis for Port D23</H1> <TABLE> <TR><TD>System:</TD><TD> MS Core </TD></TR> <TR><TD>Maintainer:</TD><TD>Physical Phone</TD></TR> <TR><TD>Interface:</TD><TD>D23</TD></TR> <TR><TD>IP:</TD><TD>MS Core(172.31.254.254)</TD></TR> <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR> </TABLE> #--------------------------------------------------------------- Tx, Alex Paradissis System and Network Administrator MICDS (314)995-7479 On Wed, Aug 29, 2018 at 3:55 PM Walter Harms <wha...@deltapolice.ca> wrote: > Do you have different names like this example for ports 1 and 2? These > have to be different. > > > > Target[switch_port_01_in]: > > Target[switch_port_02_in]: > > > > Maybe you can post your config file? > > > > Walter > > > > *From:* mrtg [mailto:mrtg-bounces+wharms=deltapolice...@lists.oetiker.ch] *On > Behalf Of *Alex Paradissis > *Sent:* Wednesday, August 29, 2018 1:29 PM > *To:* mrtg@lists.oetiker.ch > *Subject:* [mrtg] Monitor 2 Interfaces on a router > > > > All, > > I want to monitor 2 different interfaces on the same router. When I > added a second section in the MRTG config file, and ran mrtg.cfg, I got a > error saying duplicate definition found for target. Any suggestions on a > way around that? > > > Tx, > > Alex Paradissis > > System and Network Administrator > > MICDS > > (314)995-7479 > This transmission may contain confidential or privileged communications > and the sender does not waive any related rights and obligations. If you > have any reason to believe that you are not the intended recipient or that > you have received this in error, you must immediately destroy it. > Unauthorized copying or distribution of any information herein is strictly > prohibited and may constitute a criminal offence, a breach of Provincial or > Federal privacy laws, or may otherwise result in legal sanctions. We ask > that you notify the Delta Police Department immediately of any transmission > received in error, by reply email to the sender. Thank you. >
_______________________________________________ mrtg mailing list mrtg@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/mrtg