I would point cfgmaker at it and see what you get cfgmaker public@10.0.0.1
That'll tell you how to specify the interfaces. You need an underscore and then interface label for each target. -Josiah On 8/30/18 8:26 AM, Alex Paradissis wrote: > The last two entries are the same devices. I am using different vlan > gateways currently, but there are errors with the log pull for the > vlan interface that I do not get with the mgmt vlan ip. > > #--------------------------------------------------------------- > Target[10.0.0.1]: 45:public@10.0.0.1 <mailto:45%3Apublic@10.0.0.1> > > MaxBytes[10.0.0.1]: 12500000 > > Title[10.0.0.1]: HP 8212zl(10.0.0.1): ether0 > PageTop[10.0.0.1]: <H1>Traffic Analysis for Port B22</H1> > <TABLE> > <TR><TD>System:</TD><TD> MS Core </TD></TR> > <TR><TD>Maintainer:</TD><TD>L2 to STEM</TD></TR> > <TR><TD>Interface:</TD><TD>SFP A1</TD></TR> > <TR><TD>IP:</TD><TD>sample-device(10.0.0.1)</TD></TR> > <TR><TD>Max Speed:</TD> > <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR> > </TABLE> > > #--------------------------------------------------------------- > Target[172.31.254.254]: 95:public@172.31.254.254 > <mailto:95%3Apublic@172.31.254.254> > > MaxBytes[172.31.254.254]: 12500000 > > Title[172.31.254.254]: HP 8212zl(172.31.254.254): ether0 > PageTop[172.31.254.254]: <H1>Traffic Analysis for Port D23</H1> > <TABLE> > <TR><TD>System:</TD><TD> MS Core </TD></TR> > <TR><TD>Maintainer:</TD><TD>Physical Phone</TD></TR> > <TR><TD>Interface:</TD><TD>D23</TD></TR> > <TR><TD>IP:</TD><TD>MS Core(172.31.254.254)</TD></TR> > <TR><TD>Max Speed:</TD> > <TD>1250.0 kBytes/s (ethernetCsmacd)</TD></TR> > </TABLE> > > #--------------------------------------------------------------- > > Tx, > > Alex Paradissis > System and Network Administrator > MICDS > > (314)995-7479 > > > On Wed, Aug 29, 2018 at 3:55 PM Walter Harms <wha...@deltapolice.ca > <mailto:wha...@deltapolice.ca>> wrote: > > Do you have different names like this example for ports 1 and 2? > These have to be different. > > > > Target[switch_port_01_in]: > > Target[switch_port_02_in]: > > > > Maybe you can post your config file? > > > > Walter > > > > *From:*mrtg [mailto:mrtg-bounces+wharms > <mailto:mrtg-bounces%2Bwharms>=deltapolice...@lists.oetiker.ch > <mailto:deltapolice...@lists.oetiker.ch>] *On Behalf Of *Alex > Paradissis > *Sent:* Wednesday, August 29, 2018 1:29 PM > *To:* mrtg@lists.oetiker.ch <mailto:mrtg@lists.oetiker.ch> > *Subject:* [mrtg] Monitor 2 Interfaces on a router > > > > All, > > I want to monitor 2 different interfaces on the same router. > When I added a second section in the MRTG config file, and ran > mrtg.cfg, I got a error saying duplicate definition found for > target. Any suggestions on a way around that? > > > Tx, > > Alex Paradissis > > System and Network Administrator > > MICDS > > (314)995-7479 > > This transmission may contain confidential or privileged > communications and the sender does not waive any related rights > and obligations. If you have any reason to believe that you are > not the intended recipient or that you have received this in > error, you must immediately destroy it. Unauthorized copying or > distribution of any information herein is strictly prohibited and > may constitute a criminal offence, a breach of Provincial or > Federal privacy laws, or may otherwise result in legal sanctions. > We ask that you notify the Delta Police Department immediately of > any transmission received in error, by reply email to the sender. > Thank you. > > > > _______________________________________________ > mrtg mailing list > mrtg@lists.oetiker.ch > https://lists.oetiker.ch/cgi-bin/listinfo/mrtg -- Wm. Josiah Erikson Associate Director of IT, Infrastructure Group Network Engineer System Administrator, School of CS Hampshire College Amherst, MA 01002 (413) 559-6091 pronouns: he/him/his
_______________________________________________ mrtg mailing list mrtg@lists.oetiker.ch https://lists.oetiker.ch/cgi-bin/listinfo/mrtg