Can we just get this information for TI by emailing them the question? It seems to me they should be happy to clear up any confusion. Do they just not reply to questions?
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Steve Underwood Sent: Friday, February 27, 2004 11:52 AM To: [email protected] Subject: Re: [Mspgcc-users] 161x parts Matthias, 38FF-1100 => 27FF. That's 10K not 8K. If the 2K at 0x200 to 0x9FF is really there it must overlap 2K of that 10K. The numbers for the devices with 5K of RAM work out similarly, I'd like to play with real silicon before deciding they really overlap, though. Regards, Steve Matthias Weingart wrote: >What range is overlapping? According to msp430f1611.pdf >the memory has no overlapping regions: > >0000h-000fH SFR >0010h-00ffH 8bit per. >0100h-01ffh 16bit per. >0200h-09ffh RAM 2k >0A00h-0bffh gap 512 bytes >0C00h-0fffh ROM 1k >1000h-10ffh flash 256bytes >1100h-38ffh RAM 8k >3900h-3fffh gap 1792 bytes >4000h-ffffh flash > >So I cannot see a whole 10k block!? Do you think that the RAM at 0200h is >mapped to the second gap at 3900h? (the 2nd gap is 256bytes smaller than 2k) >If this is the case than we should access it as whole block (and ignore >200-9ffh), but I cannot see this in the manual. > > Matthias > > ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ Mspgcc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mspgcc-users
